class UnixComm |
A class for socket I/O communication. More... |
| Definition | #include <mfea_unix_comm.hh> |
|---|---|
| Inherits | ProtoUnit (libproto) [public ] |
| List of all Methods |
 |
| Annotated List |
| Files |
| Globals |
| Hierarchy |
| Index |
|
|
Each protocol 'registers' for socket I/O and gets assigned one object of this class.
| UnixComm (MfeaNode& mfea_node, int ipproto, x_module_id module_id)
| UnixComm |
Constructor for given MFEA node, IP protocol, and module ID (x_module_id).
Parameters:
| mfea_node | the MFEA node (MfeaNode) this entry belongs to. |
| ipproto | the IP protocol number (e.g., IPPROTO_PIM for PIM). |
| module_id | the module ID (x_module_id) for the protocol. |
| ~UnixComm ()
| ~UnixComm |
[virtual]
Destructor
| int start ()
| start |
Start the UnixComm.
Returns: XORP_OK on success, otherwise XORP_ERROR.
Reimplemented from ProtoUnit.
| int stop ()
| stop |
Stop the UnixComm.
Returns: XORP_OK on success, otherwise XORP_ERROR.
Reimplemented from ProtoUnit.
| int get_mcast_vifs (vector<MfeaVif *>& mfea_vifs_vector)
| get_mcast_vifs |
Query the kernel to find network interfaces that are multicast-capable.
Parameters:
| mfea_vifs_vector | reference to the vector to store the created MFEA-specific vifs (MfeaVif). |
Returns: the number of created vifs on success, otherwise %XORP_ERROR.
| int ioctl_socket ()
| ioctl_socket |
[const]
Get the ioctl socket.
The ioctl socket is used for various ioctl() calls.
Returns: the socket value if valid, otherwise XORP_ERROR.
| int open_ioctl_socket ()
| open_ioctl_socket |
Open an ioctl socket.
The ioctl socket is used for various ioctl() calls.
Returns: the socket value on success, otherwise XORP_ERROR.
| int close_ioctl_socket ()
| close_ioctl_socket |
Close the ioctl socket.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int mrib_socket ()
| mrib_socket |
[const]
Get the MRIB socket.
The MRIB socket is used for obtaining Multicast Routing Information Base information.
Returns: the socket value if valid, otherwise XORP_ERROR.
| int open_mrib_socket ()
| open_mrib_socket |
Open an MRIB socket.
The MRIB socket is used for obtaining Multicast Routing Information Base information.
Returns: the socket value on success, otherwise XORP_ERROR.
| int close_mrib_socket ()
| close_mrib_socket |
Close the MRIB socket.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int mrouter_socket ()
| mrouter_socket |
[const]
Get the mrouter socket.
The mrouter socket is used for various multicast-related access.
Returns: the socket value if valid, otherwise XORP_ERROR.
| int open_mrouter_socket ()
| open_mrouter_socket |
Open an mrouter socket.
The mrouter socket is used for various multicast-related access. Note that no more than one mrouter socket (per address family) should be open at a time.
Returns: the socket value on success, otherwise XORP_ERROR.
| int close_mrouter_socket ()
| close_mrouter_socket |
Close the mrouter socket.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int set_my_mrouter_socket ()
| set_my_mrouter_socket |
Set the mrouter socket value of this entry.
The mrouter socket value of this entry is set by copying the mrouter socket value from the special house-keeping UnixComm with module ID (x_module_id) of X_MODULE_NULL.
Returns: the value of the copied mrouter socket on success, otherwise XORP_ERROR.
| int set_other_mrouter_socket ()
| set_other_mrouter_socket |
Set the mrouter socket value of the other UnixComm entries.
The mrouter socket value of the other UnixComm entries is set by copying the mrouter socket value of this entry. Note that this method should be applied only to the special house-keeping UnixComm with module ID (x_module_id) of X_MODULE_NULL.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int proto_socket ()
| proto_socket |
[const]
Get the protocol socket.
The protocol socket is specific to the particular protocol of this entry.
Returns: the socket value if valid, otherwise XORP_ERROR.
| int open_proto_socket ()
| open_proto_socket |
Open an protocol socket.
The protocol socket is specific to the particular protocol of this entry.
Returns: the socket value on success, otherwise XORP_ERROR.
| int close_proto_socket ()
| close_proto_socket |
Close the protocol socket.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int set_rcvbuf (int recv_socket, int desired_bufsize,
int min_bufsize)
| set_rcvbuf |
Set the receiving buffer size of a socket.
Parameters:
| recv_socket | the socket whose receiving buffer size to set. |
| desired_bufsize | the preferred buffer size. |
| min_bufsize | the smallest acceptable buffer size. |
Returns: the successfully set buffer size on success, otherwise XORP_ERROR
| int ip_hdr_include (bool enable_bool)
| ip_hdr_include |
Set/reset the "Header Included" option (for IPv4) on the protocol socket.
If set, the IP header of a raw packet should be created by the application itself, otherwise the kernel will build it. Note: used only for IPv4. In post-RFC-2292, IPV6_PKTINFO has similar functions, but because it requires the interface index and outgoing address, it is of little use for our purpose. Also, in RFC-2292 this option was a flag, so for compatibility reasons we better not set it here; instead, we will use sendmsg() to specify the header's field values.
Parameters:
| enable_bool | if true, set the option, otherwise reset it. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int recv_pktinfo (bool enable_bool)
| recv_pktinfo |
Enable/disable receiving information about some of the fields in the IP header on the protocol socket.
If enabled, values such as interface index, destination address and IP TTL (a.k.a. hop-limit in IPv6) will be received as well. Note: used only for IPv6. In IPv4 we don't have this; the whole IP packet is passed to the application listening on a raw socket.
Parameters:
| enable_bool | if true, set the option, otherwise reset it. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int set_mcast_ttl (int ttl)
| set_mcast_ttl |
Set the default TTL (or hop-limit in IPv6) for the outgoing multicast packets on the protocol socket.
Parameters:
| ttl | the desired IP TTL (a.k.a. hop-limit in IPv6) value. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int set_multicast_loop (bool enable_bool)
| set_multicast_loop |
Set/reset the "Multicast Loop" flag on the protocol socket.
If the multicast loopback flag is set, a multicast datagram sent on that socket will be delivered back to this host (assuming the host is a member of the same multicast group).
Parameters:
| enable_bool | if true, set the loopback, otherwise reset it. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int start_mrt ()
| start_mrt |
Start/enable the multicast routing in the kernel.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int stop_mrt ()
| stop_mrt |
Stop/disable the multicast routing in the kernel.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int start_pim ()
| start_pim |
Start/enable PIM routing in the kernel.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int stop_pim ()
| stop_pim |
Stop/disable PIM routing in the kernel.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int set_default_multicast_vif (uint16_t vif_index)
| set_default_multicast_vif |
Set default interface for outgoing multicast on the protocol socket.
Parameters:
| vif_index | the vif index of the interface to become the default multicast interface. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int join_multicast_group (uint16_t vif_index, const IPvX& group)
| join_multicast_group |
Join a multicast group on an interface.
Parameters:
| vif_index | the vif index of the interface to join the multicast group. |
| group | the multicast group to join. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int leave_multicast_group (uint16_t vif_index, const IPvX& group)
| leave_multicast_group |
Leave a multicast group on an interface.
Parameters:
| vif_index | the vif index of the interface to leave the multicast group. |
| group | the multicast group to leave. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int add_multicast_vif (uint16_t vif_index)
| add_multicast_vif |
Add a virtual multicast interface to the kernel.
Parameters:
| vif_index | the vif index of the virtual interface to add. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int delete_multicast_vif (uint16_t vif_index)
| delete_multicast_vif |
Delete a virtual multicast interface from the kernel.
Parameters:
| vif_index | the vif index of the interface to delete. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int add_mfc (const IPvX& source, const IPvX& group,
uint16_t iif_vif_index, uint8_t *oifs_ttl,
uint8_t *oifs_flags,
const IPvX& rp_addr)
| add_mfc |
Install/modify a Multicast Forwarding Cache (MFC) entry in the kernel.
If the MFC entry specified by (@source, @group) pair was not installed before, a new MFC entry will be created in the kernel; otherwise, the existing entry's fields will be modified.
Parameters:
| source | the MFC source address. |
| group | the MFC group address. |
| iif_vif_index | the MFC incoming interface index. |
| oifs_ttl | an array with the min. TTL a packet should have to be forwarded. |
| oifs_flags | an array with misc. flags for the MFC to install. Note that those flags are supported only by the advanced multicast API. |
| rp_addr | the RP address. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int delete_mfc (const IPvX& source, const IPvX& group)
| delete_mfc |
Delete a Multicast Forwarding Cache (MFC) entry in the kernel.
Parameters:
| source | the MFC source address. |
| group | the MFC group address. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int add_bw_upcall (const IPvX& source, const IPvX& group,
const struct timeval& threshold_interval,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall)
| add_bw_upcall |
Add a dataflow monitor entry in the kernel.
Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.
Parameters:
| source | the source address. |
| group | the group address. |
| threshold_interval | the dataflow threshold interval. |
| threshold_packets | the threshold (in number of packets) to compare against. |
| threshold_bytes | the threshold (in number of bytes) to compare against. |
| is_threshold_in_packets | if true, threshold_packets is valid. |
| is_threshold_in_bytes | if true, threshold_bytes is valid. |
| is_geq_upcall | if true, the operation for comparison is ">=". |
| is_leq_upcall | if true, the operation for comparison is "<=". |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int delete_bw_upcall (const IPvX& source, const IPvX& group,
const struct timeval& threshold_interval,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall)
| delete_bw_upcall |
Delete a dataflow monitor entry from the kernel.
Note: either is_threshold_in_packets or is_threshold_in_bytes (or both) must be true. Note: either is_geq_upcall or is_leq_upcall (but not both) must be true.
Parameters:
| source | the source address. |
| group | the group address. |
| threshold_interval | the dataflow threshold interval. |
| threshold_packets | the threshold (in number of packets) to compare against. |
| threshold_bytes | the threshold (in number of bytes) to compare against. |
| is_threshold_in_packets | if true, threshold_packets is valid. |
| is_threshold_in_bytes | if true, threshold_bytes is valid. |
| is_geq_upcall | if true, the operation for comparison is ">=". |
| is_leq_upcall | if true, the operation for comparison is "<=". |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int delete_all_bw_upcall (const IPvX& source, const IPvX& group)
| delete_all_bw_upcall |
Delete all dataflow monitor entries from the kernel for a given source and group address.
Parameters:
| source | the source address. |
| group | the group address. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int get_sg_count (const IPvX& source, const IPvX& group,
SgCount& sg_count)
| get_sg_count |
Get various counters per (S,G) entry.
Get the number of packets and bytes forwarded by a particular Multicast Forwarding Cache (MFC) entry in the kernel, and the number of packets arrived on wrong interface for that entry.
Parameters:
| source | the MFC source address. |
| group | the MFC group address. |
| sg_count | a reference to a SgCount class to place the result. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int get_vif_count (uint16_t vif_index, VifCount& vif_count)
| get_vif_count |
Get various counters per virtual interface.
Get the number of packets and bytes received on, or forwarded on a particular multicast interface.
Parameters:
| vif_index | the vif index of the virtual multicast interface whose statistics we need. |
| vif_count | a reference to a VifCount class to store the result. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| bool is_multicast_capable (uint16_t vif_index)
| is_multicast_capable |
[const]
Test if an interface in the kernel is multicast-capable.
Parameters:
| vif_index | the vif index of the interface to test whether is multicast capable. |
Returns: true if the interface is multicast-capable, otherwise false.
| int proto_socket_read ()
| proto_socket_read |
Read data from a protocol socket, and then call the appropriate protocol module to process it.
Note: this function should not be called directly, but should be called by its wrapper: unix_comm_proto_socket_read().
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int proto_socket_write (uint16_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl, int ip_tos,
bool router_alert_bool,
const uint8_t *databuf, size_t datalen)
| proto_socket_write |
Send a packet on a protocol socket.
Parameters:
| vif_index | the vif index of the vif that will be used to send-out the packet. |
| src | the source address of the packet. |
| dst | the destination address of the packet. |
| ip_ttl | the TTL (a.k.a. Hop-limit in IPv6) of the packet. If it has a negative value, the TTL will be set here or by the lower layers. |
| ip_tos | the TOS (a.k.a. Traffic Class in IPv6) of the packet. If it has a negative value, the TOS will be set here or by the lower layers. |
| router_alert_bool | if true, then the IP packet with the data should have the Router Alert option included. |
| databuf | the data buffer. |
| datalen | the length of the data in databuf. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int get_mrib (const IPvX& dest_addr, Mrib& mrib)
| get_mrib |
Get the Multicast Routing Information Base (MRIB) information for a given address (Mrib).
The MRIB information contains the next hop router and the vif to send out packets toward a given destination.
Parameters:
| dest_addr | the destination address to lookup. |
| mrib | a reference to a Mrib structure to return the MRIB information. |
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int get_mrib_table (Mrib **mrib_table)
| get_mrib_table |
Get all MRIB (Mrib) information from the kernel.
Parameters:
| mrib_table | a pointer to the routing table array composed of Mrib elements. |
Returns: the number of entries in return_mrib_table, or XORP_ERROR if there was an error
| void set_ignore_my_packets (bool v)
| set_ignore_my_packets |
Set/reset the flag whether to ignore the receiving my own packets.
Parameters:
| v | if true, ignore my own packets on receiving, otherwise don't ignore them. |
| void set_allow_kernel_signal_messages (bool v)
| set_allow_kernel_signal_messages |
Set/reset the flag whether to allow signal messages from the kernel.
Parameters:
| v | if true, allow delivery of signal messages from the kernel for this protocol. |
| bool is_allow_kernel_signal_messages ()
| is_allow_kernel_signal_messages |
[const]
Test if the the kernel signal messages are allowed for this protocol.
Returns: true if the kernel signal messages are allowed, otherwise false.
| void set_allow_mrib_messages (bool v)
| set_allow_mrib_messages |
Set/reset the flag whether to allow MRIB (Mrib) messages for this protocol.
Parameters:
| v | if true, allow delivery of MRIB (Mrib) messages for this protocol. |
| bool is_allow_mrib_messages ()
| is_allow_mrib_messages |
[const]
Test if the the delivery of MRIB (Mrib) messages are allowed for this protocol.
Returns: true if the delivery is allowed.
| bool mrt_api_mrt_mfc_flags_disable_wrongvif ()
| mrt_api_mrt_mfc_flags_disable_wrongvif |
[const]
Get the flag that indicates whether the kernel supports disabling of WRONGVIF signal per (S,G) per interface.
Returns: true if the kernel supports disabling of WRONGVIF signal per (S,G) per interface, otherwise false.
| bool mrt_api_mrt_mfc_flags_border_vif ()
| mrt_api_mrt_mfc_flags_border_vif |
[const]
Get the flag that indicates whether the kernel supports setting of the Border bit flag per (S,G) per interface.
The Border bit flag is used for PIM-SM Register encapsulation in the kernel.
Returns: true if the kernel supports setting of the Border bit flag per (S,G) per interface, otherwise false.
| bool mrt_api_mrt_mfc_rp ()
| mrt_api_mrt_mfc_rp |
[const]
Get the flag that indicates whether the kernel supports adding the RP address to the kernel.
The RP address is used for PIM-SM Register encapsulation in the kernel.
Returns: true if the kernel supports adding the RP address to the kernel, otherwise false.
| bool mrt_api_mrt_mfc_bw_upcall ()
| mrt_api_mrt_mfc_bw_upcall |
[const]
Get the flag that indicates whether the kernel supports the bandwidth upcall mechanism.
Returns: true if the kernel supports the bandwidth upcall mechanism.
| x_module_id module_id ()
| module_id |
[const]
Get the module ID (x_module_id) for the protocol that created this entry.
Returns: the module ID (x_module_id) of the protocol that created this entry.
Reimplemented from ProtoUnit.
| Generated by: pavlin on possum.icir.org on Mon Mar 10 19:34:53 2003, using kdoc 2.0a54+XORP. |