class ProtoUnit |
Base class for each protocol unit (node, vif, etc). More... |
| Definition | #include <proto_unit.hh> |
|---|---|
| Inherited by | ProtoNode, ProtoNodeCli |
| List of all Methods |
 |
| Annotated List |
| Files |
| Globals |
| Hierarchy |
| Index |
|
|
| ProtoUnit (int init_family, x_module_id init_module_id)
| ProtoUnit |
Constructor for a given address family and module ID.
Parameters:
| init_family | the address family. |
| init_module_id | the module ID (x_module_id). |
| ~ProtoUnit ()
| ~ProtoUnit |
[virtual]
Destructor
| int start ()
| start |
Start the unit.
This operation will fail if the unit is disabled, or is already up.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int stop ()
| stop |
Stop the unit.
This operation will fail if the unit was down already.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int pending_start ()
| pending_start |
Pending-start the unit.
The pending-start state is an intermediate state between down and up. In this state only some operations are allowed (the allowed operations are unit-specific). This operation will fail if the unit is disabled, is up, or is pending-up already.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| int pending_stop ()
| pending_stop |
Pending-stop the unit.
The pending-stop state is an intermediate state between up and down. In this state only some operations are allowed (the allowed operations are unit-specific). This operation will fail if the unit is not up.
Returns: XORP_OK on success, otherwise XORP_ERROR.
| void enable ()
| enable |
Enable the unit.
If an unit is not enabled, it cannot be start, or pending-start.
| void disable ()
| disable |
Disable the unit.
If an unit is disabled, it cannot be start or pending-start. If the unit was runnning, it will be stop first.
| int family ()
| family |
[const]
Get the address family.
Returns: the address family (e.g., AF_INET or AF_INET6 for IPv4 and IPv6 respectively).
| x_module_id module_id ()
| module_id |
[const]
Get the module ID.
Returns: the module ID (x_module_id).
| int proto_version ()
| proto_version |
[const]
Get the current protocol version.
Returns: the current protocol version.
| void set_proto_version (int v)
| set_proto_version |
Set the current protocol version.
Parameters:
| v | the protocol version. |
| int proto_version_default ()
| proto_version_default |
[const]
Get the default protocol version.
Returns: the default protocol version.
| void set_proto_version_default (int v)
| set_proto_version_default |
Set the default protocol version.
Parameters:
| v | the default protocol version. |
| bool is_ipv4 ()
| is_ipv4 |
[const]
Test if the address family of the unit is IPv4.
Returns: true if the address family of the unit is IPv4.
| bool is_ipv6 ()
| is_ipv6 |
[const]
Test if the address family of the unit is IPv6.
Returns: true if the address family of the unit is IPv6.
| bool is_up ()
| is_up |
[const]
Test if the unit state is UP.
Returns: true if the unit state is UP.
| bool is_down ()
| is_down |
[const]
Test if the unit state is DOWN.
Returns: true if the unit state is DOWN.
| bool is_pending_up ()
| is_pending_up |
[const]
Test if the unit state is PENDING-UP.
Returns: true if the unit state is PENDING-UP.
| bool is_pending_down ()
| is_pending_down |
[const]
Test if the unit state is PENDING-DOWN.
Returns: true if the unit state is PENDING-DOWN.
| bool is_enabled ()
| is_enabled |
[const]
Test if the unit is enabled.
Returns: true if the unit is enabled.
| bool is_disabled ()
| is_disabled |
[const]
Test if the unit is disabled.
Returns: true if the unit is disabled.
| bool is_debug ()
| is_debug |
[const]
Test if debug mode is enabled.
Returns: true if debug mode is enabled.
| void set_debug (bool v)
| set_debug |
Set/reset debug mode.
Parameters:
| v | if true, set debug mode, otherwise reset it. |
| const char * module_name ()
| module_name |
[const]
Get the module name.
TODO: temporary, all names are listed in "_x_module_name[][]" in proto_unit.cc.
Returns: C-style string with the module name.
| const char * state_string ()
| state_string |
[const]
Get a string with the state of the unit.
The state string is one of the following: "DISABLED", "DOWN", "UP", "PENDING_UP", "PENDING_DOWN", "UNKNOWN"
Returns: C-style string with the state of the unit.
| int comm_handler ()
| comm_handler |
[const]
Get the communication handler for this unit.
Note: currently, the purpose of the communication handler is not clear.
Returns: the communication handler for this unit.
| void set_comm_handler (int v)
| set_comm_handler |
Set the communication handler for this unit.
Parameters:
| v | the communication handler to set for this unit. |
| bool proto_is_mld6igmp ()
| proto_is_mld6igmp |
[const]
Test if the protocol is MLD6 or IGMP.
Returns: true if the protocol is MLD6 or IGMP.
| bool proto_is_igmp ()
| proto_is_igmp |
[const]
Test if the protocol is IGMP.
Returns: true if the protocol is IGMP.
| bool proto_is_mld6 ()
| proto_is_mld6 |
[const]
Test if the protocol is MLD6.
Returns: true if the protocol is MLD6.
| bool proto_is_pimsm ()
| proto_is_pimsm |
[const]
Test if the protocol is PIM-SM.
Returns: true if the protocol is PIM-SM.
| bool proto_is_pimdm ()
| proto_is_pimdm |
[const]
Test if the protocol is PIM-DM.
Returns: true if the protocol is PIM-DM.
| bool proto_is_bgmp ()
| proto_is_bgmp |
[const]
Test if the protocol is BGMP.
Returns: true if the protocol is BGMP.
| bool proto_is_bgp ()
| proto_is_bgp |
[const]
Test if the protocol is BGP.
Returns: true if the protocol is BGP.
| bool proto_is_ospf ()
| proto_is_ospf |
[const]
Test if the protocol is OSPF.
Returns: true if the protocol is OSPF.
| bool proto_is_rip ()
| proto_is_rip |
[const]
Test if the protocol is RIP.
Returns: true if the protocol is RIP.
| Generated by: pavlin on possum.icir.org on Mon Mar 10 19:34:51 2003, using kdoc 2.0a54+XORP. |