From: Jef Knoors ([email protected])
Date: Mon May 22 2000 - 07:36:42 CEST
Thanks for your advice,
and can it also go the otherway: with smbclient send a fax to the win9x
machine. (I have a modem that is not supported by mulinux: Etech bullet pci
56k6)
Jef
----- Original Message -----
From: Michele Andreoli <[email protected]>
To: <[email protected]>
Sent: Friday, May 19, 2000 11:19 AM
Subject: Re: fax from win9x trough smbd
> On Thu, May 18, 2000 at 10:53:36PM +0200, jef knoors nicely wrote:
> > hello michele,
> >
> > I found some intersting pages:
> >
> > !==
> >
> > !== Faxing.txt for Samba release 2.0.3 28 Feb 1999
> >
> > !==
> >
> > Contributor: Gerhard Zuber <[email protected]>
> >
>
> Thanks, Jef: I know this nice text. In the past, I setup a similar fax
> server. The basic trick is the declare (in Win*) the network-printer
> as "postscript printer": in this way, the printer job is pure text.
>
> A script, in the server side, may intercept the string TEL: of FAX:,
> embedded in the text, to extract the telephone number and to activate
> faxing.
>
> This can be done also in muLinux, without Gosthscript: it is enough
> to install a Postscript->G3fax converter.
>
> Michele
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:14 CET