Internet Engineering Task Force A. Bierman Internet-Draft Netconf Central, Inc. Intended status: Informational October 26, 2009 Expires: April 29, 2010 Guidelines for Authors and Reviewers of YANG Data Model Documents draft-ietf-netmod-yang-usage-02 Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on April 29, 2010. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Bierman Expires April 29, 2010 [Page 1] Internet-Draft YANG Usage Guidelines October 2009 Abstract This memo provides guidelines for authors and reviewers of standards track specifications containing YANG data model modules. Applicable portions may be used as a basis for reviews of other YANG data model documents. Recommendations and procedures are defined, which are intended to increase interoperability and usability of NETCONF implementations which utilize YANG data model modules. Bierman Expires April 29, 2010 [Page 2] Internet-Draft YANG Usage Guidelines October 2009 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. Requirements Notation . . . . . . . . . . . . . . . . . . 5 2.2. NETCONF Terms . . . . . . . . . . . . . . . . . . . . . . 5 2.3. YANG Terms . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. General Documentation Guidelines . . . . . . . . . . . . . . . 7 3.1. YANG Data Model Boilerplate Section . . . . . . . . . . . 7 3.2. Narrative Sections . . . . . . . . . . . . . . . . . . . . 7 3.3. Definitions Section . . . . . . . . . . . . . . . . . . . 8 3.4. Security Considerations Section . . . . . . . . . . . . . 8 3.5. IANA Considerations Section . . . . . . . . . . . . . . . 8 3.5.1. Documents that Create a New Name Space . . . . . . . . 8 3.5.2. Documents that Extend an Existing Name Space . . . . . 9 3.6. Reference Sections . . . . . . . . . . . . . . . . . . . . 9 3.7. Copyright Notices . . . . . . . . . . . . . . . . . . . . 9 3.8. Intellectual Property Section . . . . . . . . . . . . . . 9 4. YANG Usage Guidelines . . . . . . . . . . . . . . . . . . . . 10 4.1. Module Naming Conventions . . . . . . . . . . . . . . . . 10 4.2. Identifiers . . . . . . . . . . . . . . . . . . . . . . . 10 4.3. Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.4. Conditional Statements . . . . . . . . . . . . . . . . . . 11 4.5. Lifecycle Management . . . . . . . . . . . . . . . . . . . 12 4.6. Header Contents . . . . . . . . . . . . . . . . . . . . . 12 4.7. Temporary Namespace Assignments . . . . . . . . . . . . . 13 4.8. Top Level Database Objects . . . . . . . . . . . . . . . . 14 4.9. Data Types . . . . . . . . . . . . . . . . . . . . . . . . 15 4.10. Reusable Type Definitions . . . . . . . . . . . . . . . . 15 4.11. Object Definitions . . . . . . . . . . . . . . . . . . . . 16 4.12. RPC Definitions . . . . . . . . . . . . . . . . . . . . . 17 4.13. Notification Definitions . . . . . . . . . . . . . . . . . 17 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 18 6. Security Considerations . . . . . . . . . . . . . . . . . . . 19 7. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8.1. Normative References . . . . . . . . . . . . . . . . . . . 21 8.2. Informative References . . . . . . . . . . . . . . . . . . 21 Appendix A. Module Review Checklist . . . . . . . . . . . . . . . 22 Appendix B. YANG Module Template . . . . . . . . . . . . . . . . 24 Appendix C. Change Log . . . . . . . . . . . . . . . . . . . . . 27 C.1. Changes from 00 to 01 . . . . . . . . . . . . . . . . . . 27 C.2. Changes from 01 to 02 . . . . . . . . . . . . . . . . . . 27 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 28 Bierman Expires April 29, 2010 [Page 3] Internet-Draft YANG Usage Guidelines October 2009 1. Introduction The standardization of network configuration interfaces for use with the NETCONF [RFC4741] protocol requires a modular set of data models, which can be reused and extended over time. This document defines a set of usage guidelines for standards track documents containing YANG [I-D.ietf-netmod-yang] data models. It is similar to the MIB usage guidelines specification [RFC4181] in intent and structure. Many YANG constructs are defined as optional to use, such as the description clause. However, in order to maximize interoperability of NETCONF implementations utilizing YANG data models, it is desirable to define a set of usage guidelines which may require a higher level of compliance than the minimum level defined in the YANG specification. The NETCONF stack can be conceptually partitioned into four layers. Layer Example +-------------+ +--------------------+ +-------------------+ (4) | Content | | Configuration data | | Notification data | +-------------+ +--------------------+ +-------------------+ | | | +-------------+ +-----------------+ +---------------+ (3) | Operations | | | | | +-------------+ +-----------------+ +---------------+ | | | +-------------+ +--------------------+ +----------------+ (2) | Messages | | , | | | +-------------+ +--------------------+ +----------------+ | | | +-------------+ +-----------------------------------------------+ (1) | Secure | | SSH, TLS, BEEP/TLS, SOAP/BEEP, SOAP/HTTPS ... | | Transports | | | +-------------+ +-----------------------------------------------+ Figure 1 This document defines usage guidelines related to the NETCONF operations layer (3), and NETCONF content layer (4). Bierman Expires April 29, 2010 [Page 4] Internet-Draft YANG Usage Guidelines October 2009 2. Terminology 2.1. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. RFC 2119 language is used here to express the views of the NETMOD working group regarding YANG module content. Yang modules complying with this document will treat the RFC 2119 terminology as if it were describing best current practices. 2.2. NETCONF Terms The following terms are defined in [RFC4741] and are not redefined here: o application o capabilities o client o operation o RPC o server 2.3. YANG Terms The following terms are defined in [I-D.ietf-netmod-yang] and are not redefined here: o data node o module o submodule o namespace o version Bierman Expires April 29, 2010 [Page 5] Internet-Draft YANG Usage Guidelines October 2009 2.4. Terms The following terms are used throughout this document: o module: Generic term for a YANG data model module or submodule. When describing properties which are specific to submodules, the term 'YANG submodule', or simply 'submodule' is used instead. o Published Document: A stable release of a module, usually contained in an RFC. o Unpublished Document: An unstable release of a module, usually contained in an Internet Draft. Bierman Expires April 29, 2010 [Page 6] Internet-Draft YANG Usage Guidelines October 2009 3. General Documentation Guidelines YANG data model modules under review are likely to be contained in Internet Drafts. All guidelines for Internet Draft authors MUST be followed. These guidelines are available online at: http://www.rfc-editor.org/rfc-editor/instructions2authors.txt The following sections MUST be present in an Internet Draft containing a module: o YANG data model boilerplate section o Narrative sections o Definitions section o Security Considerations section o IANA Considerations section o References section 3.1. YANG Data Model Boilerplate Section This section MUST contain a verbatim copy of the latest approved Internet-Standard Management Framework boilerplate, which is available on-line, in section 4 of the Trust Legal Provisions (TLP) document, at: http://trustee.ietf.org/license-info/ Each YANG module contained within an Internet Draft or RPC MUST be identified as a 'Code Component'. The strings '' and '' SHOULD be used to identify each Code Component. 3.2. Narrative Sections The narrative part MUST include an overview section that describes the scope and field of application of the module(s) defined by the specification and that specifies the relationship (if any) of these modules to other standards, particularly to standards containing other module modules. The narrative part SHOULD include one or more sections to briefly describe the structure of the modules defined in the specification. If the module(s) defined by the specification import definitions from other modules (except for those defined in the YANG [I-D.ietf-netmod-yang] or YANG Types [I-D.ietf-netmod-yang-types] documents) or are always implemented in conjunction with other modules, then those facts MUST be noted in the overview section, as Bierman Expires April 29, 2010 [Page 7] Internet-Draft YANG Usage Guidelines October 2009 MUST any special interpretations of objects in other modules. 3.3. Definitions Section This section contains the module(s) defined by the specification. These modules MUST be written in YANG [I-D.ietf-netmod-yang]. See Section 4 for guidelines on YANG usage. 3.4. Security Considerations Section Each specification that defines one or more modules MUST contain a section that discusses security considerations relevant to those modules. This section MUST be patterned after the latest approved template (available at [ed: URL TBD]). In particular, writable module objects that could be especially disruptive if abused MUST be explicitly listed by name and the associated security risks MUST be spelled out; similarly, readable module objects that contain especially sensitive information or that raise significant privacy concerns MUST be explicitly listed by name and the reasons for the sensitivity/privacy concerns MUST be explained. 3.5. IANA Considerations Section In order to comply with IESG policy as set forth in http://www.ietf.org/ID-Checklist.html, every Internet-Draft that is submitted to the IESG for publication MUST contain an IANA Considerations section. The requirements for this section vary depending what actions are required of the IANA. 3.5.1. Documents that Create a New Name Space If an Internet-Draft defines a new name space that is to be administered by the IANA, then the document MUST include an IANA Considerations section, that specifies how the name space is to be administered. Specifically, if any YANG module namespace statement value contained in the document is not already registered with IANA, then a new YANG Namespace registry entry must be requested from the IANA. The YANG specification includes the procedure for this purpose in its IANA Considerations section. Bierman Expires April 29, 2010 [Page 8] Internet-Draft YANG Usage Guidelines October 2009 3.5.2. Documents that Extend an Existing Name Space If an Internet-Draft defines any extensions to a YANG Namespace already administered by the IANA, then the document MUST include an IANA Considerations section, specifies how the name space extension is to be administered. Specifically, if any YANG submodule belongs-to value contained in the document is associated with a module that contains a namespace statement value equal to a YANG Namespace already administered by the IANA, then the existing YANG Namespace must be updated to include the new submodule. 3.6. Reference Sections For every import or include statement which appears in a module contained in the specification, which identifies a module in a separate document, a corresponding normative reference to that document MUST appear in the Normative References section. The reference MUST correspond to the specific module version actually used within the specification. For every reference statement which appears in a module contained in the specification, which identifies a separate document, a corresponding normative reference to that document SHOULD appear in the Normative References section. The reference SHOULD correspond to the specific document version actually used within the specification. 3.7. Copyright Notices The proper copyright notices MUST be present in the module description statement. Refer to the IETF Trust Legal Provision for the exact legal text that needs to be included. 3.8. Intellectual Property Section The proper IPR statements MUST be present in the document, according to the most current Internet Draft boilerplate. Refer to the IETF Trust Legal Provision for the exact legal text that needs to be included. Bierman Expires April 29, 2010 [Page 9] Internet-Draft YANG Usage Guidelines October 2009 4. YANG Usage Guidelines In general, modules in IETF standards-track specifications MUST comply with all syntactic and semantic requirements of YANG. [I-D.ietf-netmod-yang]. The guidelines in this section are intended to supplement the YANG specification, which is intended to define a minimum set of conformance requirements. In order to promote interoperability and establish a set of practices based on previous experience, the following sections establish usage guidelines for specific YANG constructs. Only guidelines which clarify or restrict the minimum conformance requirements are included here. 4.1. Module Naming Conventions Modules contained in standards track documents SHOULD be named with the prefix 'ietf-'. Other types of modules MUST NOT use the 'ietf-' prefix string. A distinctive word or acronym (e.g., protocol name or working group acronym) SHOULD be used in the module name. If new definitions are being defined to extend one or more existing modules, then the same word or acronym should be reused, instead of creating a new one. All published module names MUST be unique. Once a module name is published, it MUST not be reused, even if the RFC containing the module is reclassified to 'Historic' status. 4.2. Identifiers Identifiers for modules, submodules, typedefs, groupings, data objects, rpcs, and notifications MUST be between 1 and 64 characters in length. 4.3. Defaults In general, it is suggested that sub-statements containing default values SHOULD NOT be present. For example, 'status current;', 'config true;', 'mandatory false;', and 'max-elements unbounded;' are common defaults which would make the module difficult to read if used everywhere they are allowed. Instead, it is suggested that common statements SHOULD only be used when being set to a value other than the default value. Bierman Expires April 29, 2010 [Page 10] Internet-Draft YANG Usage Guidelines October 2009 4.4. Conditional Statements A module may be conceptually partitioned in several ways, using the 'if-feature' and/or 'when' statements. In addition, NETCONF capabilities are designed to identify optional functionality. Data model designers need to carefully consider all modularity aspects, including the use of YANG conditional statements. Objects SHOULD NOT directly reference NETCONF capabilities, in order to specify optional behavior. Instead, a 'feature' statement SHOULD be defined to represent the NETCONF capability, and the 'if-feature' statement SHOULD be used within the object definition. If the condition associated with the desired semantics is not dependent on any particular instance value within the database, then an 'if-feature' statement SHOULD be used instead of a 'when' statement. All 'must' and 'when' statements MUST contain valid XPath. If any name tests are present, they MUST contain valid module prefixes and data node names. References to non-existent nodes are considered invalid in YANG, even though they are permitted in XPath. The 'attribute' and 'namespace' axis SHOULD NOT be used because the associated XML node types are not supported in YANG, and may not be supported consistently across NETCONF server implementations. The 'position' and 'last' functions SHOULD NOT be used. Also, the 'preceding', and 'following' axes SHOULD NOT be used. These constructs rely on XML document order within a NETCONF server configuration database, which may not be supported consistently or produce reliable results across implementations. Predicate expressions based on static node properties (e.g., name, value, ancestors, descendants) SHOULD be used instead. The 'preceding-sibling' and 'following-sibling' axes MAY be used, with caution. A server is not required to maintain a persistent or deterministic XML document order, which will affect use of these axes. Implicit 'position' function calls within predicates SHOULD NOT be used. (e.g., //chapter[42]). Data nodes which use the 'int64' and 'uint64' built-in type SHOULD NOT be used within relational expressions. There are boundary conditions in which the translation from the YANG 64-bit type to an XPath number can cause incorrect results. Bierman Expires April 29, 2010 [Page 11] Internet-Draft YANG Usage Guidelines October 2009 Data modelers need to be careful not to confuse the YANG value space and the XPath value space. The data types are not the same in both, and conversion between YANG and XPath data types SHOULD be considered carefully. Explicit XPath data type conversions MAY be used (e.g., 'string', 'boolean', or 'number' functions), instead of implicit XPath data type conversions. 4.5. Lifecycle Management The status statement SHOULD NOT be present if its value is 'current'. It MUST be present if its value is 'deprecated' or 'obsolete'. The module or submodule name MUST NOT be changed, once the document containing the module or submodule is published. The module namespace URI value SHOULD NOT be changed, once the document containing the module is published. The revision-date sub-statement (within the imports statement) SHOULD be present. It MUST be present (in all published modules) if any groupings are used from the external module. The revision-date sub-statement (within the include statement) MAY be present. It SHOULD be present (in all published modules) if any groupings are used from the external sub-module. 4.6. Header Contents For published modules, the namespace MUST be a globally unique URI, as defined in [RFC3986]. This value is usually assigned by the IANA. The organization statement MUST be present. If the module is contained in a documented intended for standards-track status, then the organization SHOULD be the IETF working group chartered to write the document. The contact statement MUST be present. If the module is contained in a documented intended for standards-track status, then the working group WEB and mailing information MUST be present, and the document author contact information SHOULD be present. In addition, the Area Director and other contact information MAY be present. The description statement MUST be present. If the module is contained in an unpublished document, then the file name of this document SHOULD be identified in the description statement. This text MUST be removed when the document is published. Bierman Expires April 29, 2010 [Page 12] Internet-Draft YANG Usage Guidelines October 2009 Modules are often extracted from their original documents and it is useful for developers and operators to know how to find the original source document in a consistent manner. The reference statement MUST be present. It MUST identify the published document which contains the module. If the module relies on information contained in other documents, which are not the same documents implied by the import statements present in the module, then these documents MUST be identified in the reference statement. A revision statement MUST be present for each published version of the module. Each new revision MUST include a revision date which is higher than any other revision date in the module. It is acceptable to reuse the same revision statement within unpublished versions (i.e., Internet Drafts), but the revision date MUST be updated to a higher value each time the Internet Draft is re- published. 4.7. Temporary Namespace Assignments It is desirable to include only valid YANG modules in documents, whether they are published yet or not. o allows the module to compile correctly instead of generating disruptive fatal errors. o allows early implementors to use the modules without picking a random value for this field. o allows early interoperability testing since independent implementations will use the same namespace value. Until a URI is assigned by the IANA, a temporary namespace URI MUST be provided for the namespace statement in a YANG module. A value SHOULD be selected which is not likely to collide with other YANG namespaces. An unpublished module namespace statement value SHOULD include the field 'DRAFT-nn', where 'nn' is replaced by the current Internet Draft number. If the YANG module has been previously published, then the RPC being updated needs to be identified. In this case, an unpublished module Bierman Expires April 29, 2010 [Page 13] Internet-Draft YANG Usage Guidelines October 2009 namespace statement value SHOULD include the field 'DRAFT-XXXXBIS-nn', where 'XXXX' is replaced by the RFC number being updated, and 'nn' is replaced by the current Internet Draft number. A temporary namespace statement value SHOULD have the following form: :: The suggested URN prefix string that SHOULD be used is shown below. This value will be defined by the IANA. urn:ietf:params:xml:ns:yang: The following example URNs would be valid temporary namespace statement values: urn:ietf:params:xml:ns:yang:ietf-netconf-partial-lock:DRAFT-09 urn:ietf:params:xml:ns:yang:ietf-netconf-state:DRAFT-07 urn:ietf:params:xml:ns:yang:ietf-netconf:DRAFT-4741BIS-01 4.8. Top Level Database Objects There SHOULD only be one top-level data node defined in each YANG module. However, there MAY be more than one if needed. The top-level data organization SHOULD be considered carefully, in advance. Data model designers need to consider how the functionality for a given protocol or protocol family will grow over time. The names and data organization SHOULD reflect persistent information, such as the name of a protocol. The name of the working group SHOULD NOT be used because this may change over time. A mandatory database object is defined as a node that a client must provide for the database to be valid. The server will not provide a value under any conditions. Top-level database objects MUST NOT be mandatory. If a mandatory node appears at the top-level, it will immediately cause the database to be invalid. This can occur when the server boots or when a module is loaded dynamically at runtime. Top level objects are declared in YANG as mandatory with the mandatory statement or the min-elements statement. All nested non- presence containers are transparent, so a mandatory node nested within one or more non-presence containers causes the top-level container to be considered mandatory. Bierman Expires April 29, 2010 [Page 14] Internet-Draft YANG Usage Guidelines October 2009 4.9. Data Types Selection of an appropriate data type (i.e., built-in type, existing derived type, or new derived type) is very subjective and therefore few requirements can be specified on that subject. Data model designers SHOULD use the most appropriate built-in data type for the particular application. If extensibility of enumerated values is required, then the identityref data type SHOULD be used instead of an enumeration or other built-in type. For string data types, if a machine-readable pattern can be defined for the desired semantics, then one or more pattern statements SHOULD be present. For string data types, if the length of the string is not required to be unbounded in all implementations, then a length statement SHOULD be present. For numeric data types, if the values allowed by the intended semantics are different than those allowed by the unbounded intrinsic data type (e.g., int32), then a range statement SHOULD be present. The signed numeric data types (i.e., 'int8', 'int16', 'int32', and 'int64') SHOULD NOT be used unless negative values are allowed for the desired semantics. For enumeration or bits data types, the semantics for each enum or bit SHOULD be documented. A separate description statement (within each enum or bit statement) SHOULD be present. 4.10. Reusable Type Definitions If an appropriate derived type exists in any standard module, such as [I-D.ietf-netmod-yang-types], then it SHOULD be used instead of defining a new derived type. If an appropriate units identifier can be associated with the desired semantics, then a units statement SHOULD be present. If an appropriate default value can be associated with the desired semantics, then a default statement SHOULD be present. If a significant number of derived types are defined, and it is anticipated that these data types will be reused by multiple modules, then these derived types SHOULD be contained in a separate module or Bierman Expires April 29, 2010 [Page 15] Internet-Draft YANG Usage Guidelines October 2009 submodule, to allow easier reuse without unnecessary coupling. The description statement MUST be present. If the type definition semantics are defined in an external document, then the reference statement SHOULD be present. 4.11. Object Definitions The description statement MUST be present in the following body statements: o extension o feature o identity o typedef o grouping o augment o rpc o notification The description statement MUST be present in the following data definition constructs: o container o leaf o leaf-list o list o choice o anyxml If the object semantics are defined in an external document, then a reference statement SHOULD be present. The 'anyxml' construct MUST NOT be used within configuration data. Bierman Expires April 29, 2010 [Page 16] Internet-Draft YANG Usage Guidelines October 2009 If there are referential integrity constraints associated with the desired semantics that can be represented with XPath, then one or more must statements SHOULD be present. For list and leaf-list objects, if the number of possible instances is not required to be unbounded for all implementations, then the max-elements statement SHOULD be present. If any must or when statements are used within the object definition, then the object description statement SHOULD describe the purpose of each one. 4.12. RPC Definitions The description statement MUST be present. If the RPC method semantics are defined in an external document, then a reference statement SHOULD be present. If the RPC method impacts system behavior in some way, it SHOULD be mentioned in the description statement. If the RPC method is potentially harmful to system behavior in some way, it MUST be mentioned in the Security Considerations section of the document. 4.13. Notification Definitions The description statement MUST be present. If the notification semantics are defined in an external document, then a reference statement SHOULD be present. Bierman Expires April 29, 2010 [Page 17] Internet-Draft YANG Usage Guidelines October 2009 5. IANA Considerations There are no actions requested of IANA at this time. Bierman Expires April 29, 2010 [Page 18] Internet-Draft YANG Usage Guidelines October 2009 6. Security Considerations This document defines documentation guidelines for NETCONF content defined with the YANG data modeling language. It does not introduce any new or increased security risks into the management system. Bierman Expires April 29, 2010 [Page 19] Internet-Draft YANG Usage Guidelines October 2009 7. Acknowledgments The structure and contents of this document are adapted from Guidelines for MIB Documents [RFC4181], by C. M. Heard. Bierman Expires April 29, 2010 [Page 20] Internet-Draft YANG Usage Guidelines October 2009 8. References 8.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4741] Enns, R., "NETCONF Configuration Protocol", RFC 4741, December 2006. [I-D.ietf-netmod-yang] Bjorklund, M., "YANG - A data modeling language for NETCONF", draft-ietf-netmod-yang-08 (work in progress), October 2009. [I-D.ietf-netmod-yang-types] Schoenwaelder, J., "Common YANG Data Types", draft-ietf-netmod-yang-types-04 (work in progress), October 2009. 8.2. Informative References [RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB Documents", BCP 111, RFC 4181, September 2005. Bierman Expires April 29, 2010 [Page 21] Internet-Draft YANG Usage Guidelines October 2009 Appendix A. Module Review Checklist This section is adapted from RFC 4181. The purpose of a YANG module review is to review the YANG module both for technical correctness and for adherence to IETF documentation requirements. The following checklist may be helpful when reviewing a draft document: 1. I-D Boilerplate -- verify that the draft contains the required Internet-Draft boilerplate (see http://www.ietf.org/ietf/1id-guidelines.txt), including the appropriate statement to permit publication as an RFC, and that I-D boilerplate does not contain references or section numbers. 2. Abstract -- verify that the abstract does not contain references, that it does not have a section number, and that its content follows the guidelines in http://www.ietf.org/ietf/1id-guidelines.txt. 3. YANG Module Boilerplate -- verify that the draft contains the latest approved SNMP Network Management Framework boilerplate from the OPS area web site (http://www.ops.ietf.org/mib-boilerplate.html). [ed: real URL TBD] 4. Security Considerations Section -- verify that the draft uses the latest approved template from the OPS area web site (http://www.ops.ietf.org/mib-security.html) and that the guidelines therein have been followed. 5. IANA Considerations Section -- this section must always be present. If the draft requires no action from the IANA, ensure that this is explicitly noted. If the draft requires URI values to be assigned, ensure that the IANA Considerations section contains the information specified in [TBD] of these guidelines. If the draft contains the initial version of an IANA-maintained module, verify that the [TBD] invocation contains maintenance instructions that comply with the requirements in RFC 2434. In the latter case, the IANA Considerations section that will appear in the RFC MUST contain a pointer to the actual IANA- maintained module. 6. References -- verify that the references are properly divided between normative and informative references, that RFC 2119 is included as a normative reference if the terminology defined therein is used in the document, that all references required by the boilerplate are present, that all YANG modules containing Bierman Expires April 29, 2010 [Page 22] Internet-Draft YANG Usage Guidelines October 2009 imported items are cited as normative references, and that all citations point to the most current RFCs unless there is a valid reason to do otherwise (for example, it is OK to include an informative reference to a previous version of a specification to help explain a feature included for backward compatibility). 7. Copyright Notices -- verify that the draft contains an abbreviated copyright notice in the description statement of each YANG module or sub-module, and that it contains the full copyright notice and disclaimer specified in Sections 5.4 and 5.5 of RFC 3978 at the end of the document. Make sure that the correct year is used in all copyright dates. 8. IPR Notice -- if the draft does not contains a verbatim copy of the IPR notice specified in Section 5 of RFC 3979, recommend that the IPR notice be included. 9. Other Issues -- check for any issues mentioned in http://www.ietf.org/ID-Checklist.html that are not covered elsewhere. 10. Technical Content -- review the actual technical content for compliance with the guidelines in this document. The use of a YANG module compiler is recommended when checking for syntax errors; see [YANG tool URL TBD] for more information. Checking for correct syntax, however, is only part of the job. It is just as important to actually read the YANG module document from the point of view of a potential implementor. It is particularly important to check that description statements are sufficiently clear and unambiguous to allow interoperable implementations to be created. Bierman Expires April 29, 2010 [Page 23] Internet-Draft YANG Usage Guidelines October 2009 Appendix B. YANG Module Template module ietf-template { // replace this string with a unique namespace URN value namespace "urn:ietf:params:xml:ns:yang:ietf-template:DRAFT-02"; // replace this string, and try to pick a unique prefix prefix "temp"; // import statements here: e.g., // import ietf-yang-types { prefix yang; } // import ietf-inet-types { prefix inet; } // identify the IETF working group if applicable organization "IETF NETMOD (NETCONF Data Modeling Language) Working Group"; // update this contact statement with your info contact "WG Web: WG List: WG Chair: your-WG-chair Editor: your-name "; // replace the first sentence in this description statement. // replace the copyright notice with the most recent // version, if it has been updated since the publication // of this document description "This module defines a template for other YANG modules. Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. Redistribution and use in source and binary forms, with or Bierman Expires April 29, 2010 [Page 24] Internet-Draft YANG Usage Guidelines October 2009 without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices."; // RFC Ed.: replace XXXX with actual RFC number and remove this note reference "RFC XXXX"; // RFC Ed.: remove this note // Note: extracted from draft-ietf-netmod-yang-usage-02.txt // replace YYYY-MM-DD with a real date (year-month-day) // here is an example revision date: 2009-08-12 revision YYYY-MM-DD { description "Initial version"; Bierman Expires April 29, 2010 [Page 25] Internet-Draft YANG Usage Guidelines October 2009 } // extension statements // feature statements // identity statements // typedef statements // grouping statements // data definition statements // augment statements // rpc statements // notification statements // DO NOT put deviation statements in a published module } Figure 2 Bierman Expires April 29, 2010 [Page 26] Internet-Draft YANG Usage Guidelines October 2009 Appendix C. Change Log C.1. Changes from 00 to 01 o Added transport 'TLS' to figure 1. o Added note about RFC 2119 terminology. o Corrected URL for instructions to authors. o Updated namespace procedures section. o Updated guidelines on module contact, reference, and organization statements. o Added note on use of preceding-sibling and following-sibling axes in XPath expressions. o Added section on temporary namespace statement values. o Added section on top level database objects. o Added ietf-template.yang appendix. C.2. Changes from 01 to 02 o Updated figure 1 per mailing list comments. o Updated suggested organization to include the working group name. o Updated ietf-template.yang to use new organization statement value. o Updated Code Component requirements as per new TLP. o Updated ietf-template.yang to use new Code Component begin and end markers. o Updated references to the TLP in a couple sections. o Change manager/agent terminology to client/server. Bierman Expires April 29, 2010 [Page 27] Internet-Draft YANG Usage Guidelines October 2009 Author's Address Andy Bierman Netconf Central, Inc. Simi Valley, CA USA Email: andy@netconfcentral.com Bierman Expires April 29, 2010 [Page 28]