Source: ../../fib2mrib/fib2mrib_node.hh
|
|
|
|
// -*- c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t -*-
// Copyright (c) 2001-2009 XORP, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License, Version 2, June
// 1991 as published by the Free Software Foundation. Redistribution
// and/or modification of this program under the terms of any other
// version of the GNU General Public License is not permitted.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For more details,
// see the GNU General Public License, Version 2, a copy of which can be
// found in the XORP LICENSE.gpl file.
//
// XORP Inc, 2953 Bunker Hill Lane, Suite 204, Santa Clara, CA 95054, USA;
// http://xorp.net
// $XORP: xorp/fib2mrib/fib2mrib_node.hh,v 1.26 2009/01/05 18:30:54 jtc Exp $
#ifndef __FIB2MRIB_FIB2MRIB_NODE_HH__
#define __FIB2MRIB_FIB2MRIB_NODE_HH__
//
// Fib2mrib node definition.
//
#include <map>
#include "libxorp/service.hh"
#include "libxorp/status_codes.h"
#include "libfeaclient/ifmgr_xrl_mirror.hh"
#include "policy/backend/policytags.hh"
#include "policy/backend/policy_filters.hh"
class EventLoop;
/**
* @short A Fib2mrib helper class.
*
* This class is used to store a routing entry.
*/
class Fib2mribRoute {
public:
/**
* Constructor for a given IPv4 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
*/
Fib2mribRoute(const IPv4Net& network, const IPv4& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route)
: _network(network), _nexthop(nexthop),
_ifname(ifname), _vifname(vifname),
_metric(metric), _admin_distance(admin_distance),
_protocol_origin(protocol_origin), _xorp_route(xorp_route),
_route_type(IDLE_ROUTE), _is_ignored(false),
_is_filtered(false), _is_accepted_by_nexthop(false) {}
/**
* Constructor for a given IPv6 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
*/
Fib2mribRoute(const IPv6Net& network, const IPv6& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route)
: _network(network), _nexthop(nexthop),
_ifname(ifname), _vifname(vifname),
_metric(metric), _admin_distance(admin_distance),
_protocol_origin(protocol_origin), _xorp_route(xorp_route),
_route_type(IDLE_ROUTE), _is_ignored(false),
_is_filtered(false), _is_accepted_by_nexthop(false) {}
/**
* Equality Operator
*
* @param other the right-hand operand to compare against.
* @return true if the left-hand operand is numerically same as the
* right-hand operand.
*/
bool operator==(const Fib2mribRoute& other) const {
return ((_network == other.network())
&& (_nexthop == other.nexthop())
&& (_ifname == other.ifname())
&& (_vifname == other.vifname())
&& (_metric == other.metric())
&& (_route_type == other._route_type)
&& (_policytags == other._policytags));
}
/**
* Test if this is an IPv4 route.
*
* @return true if this is an IPv4 route, otherwise false.
*/
bool is_ipv4() const { return _network.is_ipv4(); }
/**
* Test if this is an IPv6 route.
*
* @return true if this is an IPv6 route, otherwise false.
*/
bool is_ipv6() const { return _network.is_ipv6(); }
/**
* Get the network address prefix this route applies to.
*
* @return the network address prefix this route appies to.
*/
const IPvXNet& network() const { return _network; }
/**
* Get the address of the next-hop router for this route.
*
* @return the address of the next-hop router for this route.
*/
const IPvX& nexthop() const { return _nexthop; }
/**
* Set the address of the next-hop router for this route.
*
* @param v the address of the next-hop router for this route.
*/
void set_nexthop(const IPvX& v) { _nexthop = v; }
/**
* Get the name of the physical interface toward the destination.
*
* @return the name of the physical interface toward the destination.
*/
const string& ifname() const { return _ifname; }
/**
* Set the name of the physical interface toward the destination.
*
* @param v the name of the physical interface toward the destination.
*/
void set_ifname(const string& v) { _ifname = v; }
/**
* Get the name of the virtual interface toward the destination.
*
* @return the name of the virtual interface toward the destination.
*/
const string& vifname() const { return _vifname; }
/**
* Set the name of the virtual interface toward the destination.
*
* @param v the name of the virtual interface toward the destination.
*/
void set_vifname(const string& v) { _vifname = v; }
/**
* Get the the administratively defined distance for this route.
*
* @return the administratively defined distance for this route.
*/
uint32_t admin_distance() const { return _admin_distance; }
/**
* Get the metric distance for this route.
*
* @return the metric distance for this route.
*/
uint32_t metric() const { return _metric; }
/**
* Get the name of the protocol that originated this route.
*
* @return the name of the protocol that originated this route.
*/
const string& protocol_origin() const { return _protocol_origin; }
/**
* Test if this route was installed by XORP.
*
* @return true if this route was installed by XORP.
*/
bool xorp_route() const { return _xorp_route; }
/**
* Test if this is a route to add.
*
* @return true if this is a route to add, otherwise false.
*/
bool is_add_route() const { return (_route_type == ADD_ROUTE); }
/**
* Test if this is a replacement route.
*
* @return true if this is a replacement route, otherwise false.
*/
bool is_replace_route() const { return (_route_type == REPLACE_ROUTE); }
/**
* Test if this is a route to delete.
*
* @return true if this is a route to delete, otherwise false.
*/
bool is_delete_route() const { return (_route_type == DELETE_ROUTE); }
/**
* Set the type of this route to "a route to add".
*/
void set_add_route() { _route_type = ADD_ROUTE; }
/**
* Set the type of this route to "a replacement route".
*/
void set_replace_route() { _route_type = REPLACE_ROUTE; }
/**
* Set the type of this route to "a route to delete".
*/
void set_delete_route() { _route_type = DELETE_ROUTE; }
/**
* Test if the route is interface-specific (e.g., if the interface
* is explicitly specified).
*
* @return true if the route is interface-specific, otherwise false.
*/
bool is_interface_route() const { return ! (_ifname.empty()
&& _vifname.empty()); }
/**
* Check whether the route entry is valid.
*
* @param error_msg the error message (if error).
* @return true if the route entry is valid, otherwise false.
*/
bool is_valid_entry(string& error_msg) const;
/**
* Test if the route is to be ignored.
*
* This method is used only for internal purpose when passing the route
* around.
*
* @return true if the route is to be ignored, otherwise false.
*/
bool is_ignored() const { return _is_ignored; }
/**
* Set whether the route is to be ignored.
*
* This method is used only for internal purpose when passing the route
* around.
*
* @param v true if the route is to be ignored, otherwise false.
*/
void set_ignored(bool v) { _is_ignored = v; }
/**
* @return policy-tags for this route.
*/
PolicyTags& policytags() { return _policytags; }
/**
* @return whether route has been rejected by policy filter.
*
* @return true if route has been rejected by a policy filter, otherwise
* false.
*/
bool is_filtered() const { return _is_filtered; }
/**
* Set a flag that indicates whether the route is to be considered
* filtered [rejected by the policy filter].
*
* @param v true if the route should be considered filtered, otherwise
* false.
*/
void set_filtered(bool v) { _is_filtered = v; }
/**
* Test whether the route is accepted based on its next-hop information.
*
* @return true if the route is accepted based on its next-hop
* information, otherwise false.
*/
bool is_accepted_by_nexthop() const { return _is_accepted_by_nexthop; }
/**
* Set a flag that indicates whether the route is accepted based
* on its next-hop information.
*
* @param v true if the route is accepted based on its next-hop
* information, otherwise false.
*/
void set_accepted_by_nexthop(bool v) { _is_accepted_by_nexthop = v; }
/**
* Test whether the route is accepted for transmission to the RIB.
*
* @return true if route is accepted for transmission to the RIB,
* otherwise false.
*/
bool is_accepted_by_rib() const;
private:
IPvXNet _network;
IPvX _nexthop;
string _ifname;
string _vifname;
uint32_t _metric;
uint32_t _admin_distance;
string _protocol_origin;
bool _xorp_route;
enum RouteType { IDLE_ROUTE, ADD_ROUTE, REPLACE_ROUTE, DELETE_ROUTE };
RouteType _route_type;
bool _is_ignored; // True if the route is to be ignored
bool _is_filtered; // True if rejected by a policy filter
bool _is_accepted_by_nexthop; // True if the route is accepted based on its next-hop information
PolicyTags _policytags;
};
/**
* @short The Fib2mrib node class.
*
* There should be one node per Fib2mrib instance.
*/
class Fib2mribNode : public IfMgrHintObserver,
public ServiceBase,
public ServiceChangeObserverBase {
public:
/**
* Constructor for a given event loop.
*
* @param eventloop the event loop to use.
*/
Fib2mribNode(EventLoop& eventloop);
/**
* Destructor
*/
virtual ~Fib2mribNode();
/**
* Get the event loop this node is added to.
*
* @return the event loop this node is added to.
*/
EventLoop& eventloop() { return _eventloop; }
/**
* Get the protocol name.
*
* @return a string with the protocol name.
*/
const string& protocol_name() const { return _protocol_name; }
/**
* Startup the node operation.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int startup();
/**
* Shutdown the node operation.
*
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int shutdown();
/**
* Get the node status (see @ref ProcessStatus).
*
* @param reason_msg return-by-reference string that contains
* human-readable information about the status.
* @return the node status (see @ref ProcessStatus).
*/
ProcessStatus node_status(string& reason_msg);
/**
* Test if the node processing is done.
*
* @return true if the node processing is done, otherwise false.
*/
bool is_done() const { return (_node_status == PROC_DONE); }
/**
* Test whether the node operation is enabled.
*
* @return true if the node operation is enabled, otherwise false.
*/
bool is_enabled() const { return _is_enabled; }
/**
* Enable/disable node operation.
*
* Note that for the time being it affects only whether the routes
* are installed into RIB. In the future it may affect the interaction
* with other modules as well.
*
* @param enable if true then enable node operation, otherwise disable it.
*/
void set_enabled(bool enable);
/**
* Add an IPv4 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_route4(const IPv4Net& network, const IPv4& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route,
string& error_msg);
/**
* Add an IPv6 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_route6(const IPv6Net& network, const IPv6& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route,
string& error_msg);
/**
* Replace an IPv4 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int replace_route4(const IPv4Net& network, const IPv4& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route,
string& error_msg);
/**
* Replace an IPv6 route.
*
* @param network the network address prefix this route applies to.
* @param nexthop the address of the next-hop router for this route.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param metric the routing metric for this route.
* @param admin_distance the administratively defined distance for this
* route.
* @param protocol_origin the name of the protocol that originated this
* route.
* @param xorp_route true if this route was installed by XORP.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int replace_route6(const IPv6Net& network, const IPv6& nexthop,
const string& ifname, const string& vifname,
uint32_t metric, uint32_t admin_distance,
const string& protocol_origin, bool xorp_route,
string& error_msg);
/**
* Delete an IPv4 route.
*
* @param network the network address prefix this route applies to.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_route4(const IPv4Net& network, const string& ifname,
const string& vifname, string& error_msg);
/**
* Delete an IPv6 route.
*
* @param network the network address prefix this route applies to.
* @param ifname the name of the physical interface toward the
* destination.
* @param vifname the name of the virtual interface toward the
* destination.
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_route6(const IPv6Net& network, const string& ifname,
const string& vifname, string& error_msg);
//
// Debug-related methods
//
/**
* Test if trace log is enabled.
*
* This method is used to test whether to output trace log debug messges.
*
* @return true if trace log is enabled, otherwise false.
*/
bool is_log_trace() const { return (_is_log_trace); }
/**
* Enable/disable trace log.
*
* This method is used to enable/disable trace log debug messages output.
*
* @param is_enabled if true, trace log is enabled, otherwise is disabled.
*/
void set_log_trace(bool is_enabled) { _is_log_trace = is_enabled; }
/**
* Configure a policy filter.
*
* Will throw an exception on error.
*
* Export filter is not supported by fib2mrib routes.
*
* @param filter identifier of filter to configure.
* @param conf configuration of the filter.
*/
void configure_filter(const uint32_t& filter, const string& conf);
/**
* Reset a policy filter.
*
* @param filter identifier of filter to reset.
*/
void reset_filter(const uint32_t& filter);
/**
* Push all the routes through the policy filters for re-filtering.
*/
void push_routes();
/**
* Push or pull all the routes to/from the RIB.
*
* @param is_push if true, then push the routes, otherwise pull them
*/
void push_pull_rib_routes(bool is_push);
protected:
//
// IfMgrHintObserver methods
//
void tree_complete();
void updates_made();
void incr_startup_requests_n();
void decr_startup_requests_n();
void incr_shutdown_requests_n();
void decr_shutdown_requests_n();
void update_status();
private:
/**
* A method invoked when the status of a service changes.
*
* @param service the service whose status has changed.
* @param old_status the old status.
* @param new_status the new status.
*/
void status_change(ServiceBase* service,
ServiceStatus old_status,
ServiceStatus new_status);
/**
* Get a reference to the service base of the interface manager.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @return a reference to the service base of the interface manager.
*/
virtual const ServiceBase* ifmgr_mirror_service_base() const = 0;
/**
* Get a reference to the interface manager tree.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @return a reference to the interface manager tree.
*/
virtual const IfMgrIfTree& ifmgr_iftree() const = 0;
/**
* Initiate registration with the FEA.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void fea_register_startup() = 0;
/**
* Initiate de-registration with the FEA.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void fea_register_shutdown() = 0;
/**
* Initiate registration with the RIB.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void rib_register_startup() = 0;
/**
* Initiate de-registration with the RIB.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*/
virtual void rib_register_shutdown() = 0;
/**
* Add an IPvX route.
*
* @param fib2mrib_route the route to add.
* @see Fib2mribRoute
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int add_route(const Fib2mribRoute& fib2mrib_route, string& error_msg);
/**
* Replace a Fib2mrib IPvX route.
*
* @param fib2mrib_route the replacement route.
* @see Fib2mribRoute
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int replace_route(const Fib2mribRoute& fib2mrib_route, string& error_msg);
/**
* Delete a Fib2mrib IPvX route.
*
* @param fib2mrib_route the route to delete.
* @see Fib2mribRoute
* @param error_msg the error message (if error).
* @return XORP_OK on success, otherwise XORP_ERROR.
*/
int delete_route(const Fib2mribRoute& fib2mrib_route, string& error_msg);
/**
* Prepare a copy of a route for transmission to the RIB.
*
* Note that the original route will be modified as appropriate.
*
* @param orig_route the original route to prepare.
* @param copy_route the copy of the original route prepared for
* transmission to the RIB.
*/
void prepare_route_for_transmission(Fib2mribRoute& orig_route,
Fib2mribRoute& copy_route);
/**
* Inform the RIB about a route change.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @param fib2mrib_route the route with the information about the change.
*/
virtual void inform_rib_route_change(const Fib2mribRoute& fib2mrib_route) = 0;
/**
* Cancel a pending request to inform the RIB about a route change.
*
* This is a pure virtual function, and it must be implemented
* by the communication-wrapper class that inherits this base class.
*
* @param fib2mrib_route the route with the request that would be canceled.
*/
virtual void cancel_rib_route_change(const Fib2mribRoute& fib2mrib_route) = 0;
/**
* Update a route received from the FEA.
*
* This method is needed as a work-around of FEA-related problems
* with the routes the FEA sends to interested parties such as FIB2MRIB.
* A route is updated with interface-related information or next-hop
* address.
*
* The routes received from the FEA for the directly-connected subnets
* may not contain next-hop information and network interface information.
* If the route is for a directly-connected subnet, and if it is missing
* that information, then add the interface and next-hop router
* information.
* Furthermore, on startup, the routes received from the FEA may
* contain interface-related information, but later updates of those
* routes may be missing this information. This may create a mismatch,
* therefore all routes are updated (if possible) to contain
* interface-related information.
*
* @param iftree the tree with the interface state to update the route.
* @param route the route to update.
* @return true if the route was updated, otherwise false.
*/
bool update_route(const IfMgrIfTree& iftree, Fib2mribRoute& route);
/**
* Do policy filtering on a route.
*
* @param route route to filter.
* @return true if route was accepted by policy filter, otherwise false.
*/
bool do_filtering(Fib2mribRoute& route);
/**
* Test whether a route is accepted based on its next-hop information.
*
* @param route the route to test.
* @return true if the route is accepted based on its next-hop
* information, otherwise false.
*/
bool is_accepted_by_nexthop(const Fib2mribRoute& route) const;
/**
* Inform the RIB about a route.
*
* @param r route which should be updated in the RIB.
*/
void inform_rib(const Fib2mribRoute& r);
/**
* Set the node status.
*
* @param v the new node status.
*/
void set_node_status(ProcessStatus v) { _node_status = v; }
EventLoop& _eventloop; // The event loop
ProcessStatus _node_status; // The node/process status
const string _protocol_name; // The protocol name
bool _is_enabled; // Flag whether node is enabled
//
// The routes are stored in a multimap, because we allow more than one
// route for same subnet destination, but with different interface/vif
// name.
// E.g., in case of IPv6 we may have the same (link-local) subnet
// address pre interface.
//
multimap<IPvXNet, Fib2mribRoute> _fib2mrib_routes;
//
// Status-related state
//
size_t _startup_requests_n;
size_t _shutdown_requests_n;
//
// A local copy with the interface state information
//
IfMgrIfTree _iftree;
//
// Debug and test-related state
//
bool _is_log_trace; // If true, enable XLOG_TRACE()
PolicyFilters _policy_filters; // Only one instance of this!
};
#endif // __FIB2MRIB_FIB2MRIB_NODE_HH__
Generated by: pavlin on kobe.xorp.net on Wed Jan 7 19:11:05 2009, using kdoc 2.0a54+XORP.
