|
|
| XrlMld6igmpNode (int family, xorp_module_id module_id,
EventLoop& eventloop, XrlRouter* xrl_router)
| XrlMld6igmpNode |
| ~XrlMld6igmpNode ()
| ~XrlMld6igmpNode |
[virtual]
| int enable_cli ()
| enable_cli |
| int disable_cli ()
| disable_cli |
| int start_cli ()
| start_cli |
| int stop_cli ()
| stop_cli |
| int enable_mld6igmp ()
| enable_mld6igmp |
| int disable_mld6igmp ()
| disable_mld6igmp |
| int start_mld6igmp ()
| start_mld6igmp |
| int stop_mld6igmp ()
| stop_mld6igmp |
| void xrl_result_add_protocol_mfea (const XrlError& xrl_error)
| xrl_result_add_protocol_mfea |
[protected]
| void xrl_result_allow_signal_messages (const XrlError& xrl_error)
| xrl_result_allow_signal_messages |
[protected]
| void xrl_result_delete_protocol_mfea (const XrlError& xrl_error)
| xrl_result_delete_protocol_mfea |
[protected]
| int proto_send (const string& dst_module_instance_name,
xorp_module_id dst_module_id,
uint16_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl, int ip_tos, bool router_alert_bool,
const uint8_t * sndbuf, size_t sndlen)
| proto_send |
[protected]
Reimplemented from ProtoNode.
| void xrl_result_send_protocol_message (const XrlError& xrl_error)
| xrl_result_send_protocol_message |
[protected]
| int start_protocol_kernel ()
| start_protocol_kernel |
[protected]
Reimplemented from Mld6igmpNode.
| int stop_protocol_kernel ()
| stop_protocol_kernel |
[protected]
Reimplemented from Mld6igmpNode.
| int start_protocol_kernel_vif (uint16_t vif_index)
| start_protocol_kernel_vif |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_start_protocol_kernel_vif (const XrlError& xrl_error)
| xrl_result_start_protocol_kernel_vif |
[protected]
| int stop_protocol_kernel_vif (uint16_t vif_index)
| stop_protocol_kernel_vif |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_stop_protocol_kernel_vif (const XrlError& xrl_error)
| xrl_result_stop_protocol_kernel_vif |
[protected]
| int join_multicast_group (uint16_t vif_index,
const IPvX& multicast_group)
| join_multicast_group |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_join_multicast_group (const XrlError& xrl_error)
| xrl_result_join_multicast_group |
[protected]
| int leave_multicast_group (uint16_t vif_index,
const IPvX& multicast_group)
| leave_multicast_group |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_leave_multicast_group (const XrlError& xrl_error)
| xrl_result_leave_multicast_group |
[protected]
| int send_add_membership (const string& dst_module_instance_name,
xorp_module_id dst_module_id,
uint16_t vif_index,
const IPvX& source,
const IPvX& group)
| send_add_membership |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_send_add_membership (const XrlError& xrl_error)
| xrl_result_send_add_membership |
[protected]
| int send_delete_membership (const string& dst_module_instance_name,
xorp_module_id dst_module_id,
uint16_t vif_index,
const IPvX& source,
const IPvX& group)
| send_delete_membership |
[protected]
Reimplemented from Mld6igmpNode.
| void xrl_result_send_delete_membership (const XrlError& xrl_error)
| xrl_result_send_delete_membership |
[protected]
| int add_cli_command_to_cli_manager (const char *command_name,
const char *command_help,
bool is_command_cd,
const char *command_cd_prompt,
bool is_command_processor)
| add_cli_command_to_cli_manager |
[protected]
Reimplemented from ProtoNodeCli.
| void xrl_result_add_cli_command (const XrlError& xrl_error)
| xrl_result_add_cli_command |
[protected]
| int delete_cli_command_from_cli_manager (const char *command_name)
| delete_cli_command_from_cli_manager |
[protected]
Reimplemented from ProtoNodeCli.
| void xrl_result_delete_cli_command (const XrlError& xrl_error)
| xrl_result_delete_cli_command |
[protected]
| XrlCmdError common_0_1_get_target_name (
string& name)
| common_0_1_get_target_name |
[protected]
Get name of Xrl Target
| XrlCmdError common_0_1_get_version (
string& version)
| common_0_1_get_version |
[protected]
Get version string from Xrl Target
| XrlCmdError common_0_1_get_status (
uint32_t& status,
string& reason)
| common_0_1_get_status |
[protected]
Get status from Xrl Target
| XrlCmdError common_0_1_shutdown ()
| common_0_1_shutdown |
[protected]
Shutdown cleanly
| XrlCmdError cli_processor_0_1_process_command (
const string& processor_name,
const string& cli_term_name,
const uint32_t& cli_session_id,
const string& command_name,
const string& command_args,
string& ret_processor_name,
string& ret_cli_term_name,
uint32_t& ret_cli_session_id,
string& ret_command_output)
| cli_processor_0_1_process_command |
[protected]
Process a CLI command.
Parameters:
| processor_name | the processor name for this command. |
| cli_term_name | the terminal name the command was entered from. |
| cli_session_id | the CLI session ID the command was entered from. |
| command_name | the command name to process. |
| command_args | the command arguments to process. |
| ret_processor_name | the processor name to return back to the CLI. |
| ret_cli_term_name | the terminal name to return back. |
| ret_cli_session_id | the CLI session ID to return back. |
| ret_command_output | the command output to return back. |
| XrlCmdError mfea_client_0_1_new_vif (
const string& vif_name,
const uint32_t& vif_index)
| mfea_client_0_1_new_vif |
[protected]
Add a new vif.
Parameters:
| vif_name | the name of the new vif. |
| vif_index | the index of the new vif. |
| XrlCmdError mfea_client_0_1_delete_vif (
const string& vif_name)
| mfea_client_0_1_delete_vif |
[protected]
Delete an existing vif.
Parameters:
| vif_name | the name of the vif to delete. |
| XrlCmdError mfea_client_0_1_add_vif_addr4 (
const string& vif_name,
const IPv4& addr,
const IPv4Net& subnet,
const IPv4& broadcast,
const IPv4& peer)
| mfea_client_0_1_add_vif_addr4 |
[protected]
Add an address to a vif.
Parameters:
| vif_name | the name of the vif. |
| addr | the unicast address to add. |
| subnet | the subnet address to add. |
| broadcast | the broadcast address (when applicable). |
| peer | the peer address (when applicable). |
| XrlCmdError mfea_client_0_1_add_vif_addr6 (
const string& vif_name,
const IPv6& addr,
const IPv6Net& subnet,
const IPv6& broadcast,
const IPv6& peer)
| mfea_client_0_1_add_vif_addr6 |
[protected]
| XrlCmdError mfea_client_0_1_delete_vif_addr4 (
const string& vif_name,
const IPv4& addr)
| mfea_client_0_1_delete_vif_addr4 |
[protected]
Delete an address from a vif.
Parameters:
| vif_name | the name of the vif. |
| addr | the unicast address to delete. |
| XrlCmdError mfea_client_0_1_delete_vif_addr6 (
const string& vif_name,
const IPv6& addr)
| mfea_client_0_1_delete_vif_addr6 |
[protected]
| XrlCmdError mfea_client_0_1_set_vif_flags (
const string& vif_name,
const bool& is_pim_register,
const bool& is_p2p,
const bool& is_loopback,
const bool& is_multicast,
const bool& is_broadcast,
const bool& is_up)
| mfea_client_0_1_set_vif_flags |
[protected]
Set flags to a vif.
Parameters:
| vif_name | the name of the vif. |
| is_pim_register | true if this is a PIM Register vif. |
| is_p2p | true if this is a point-to-point vif. |
| is_loopback | true if this is a loopback interface. |
| is_multicast | true if the vif is multicast-capable. |
| is_broadcast | true if the vif is broadcast-capable. |
| is_up | true if the vif is UP and running. |
| XrlCmdError mfea_client_0_1_set_all_vifs_done ()
| mfea_client_0_1_set_all_vifs_done |
[protected]
Complete all transactions with vif information.
| XrlCmdError mfea_client_0_1_is_vif_setup_completed (
bool& is_completed)
| mfea_client_0_1_is_vif_setup_completed |
[protected]
Test if the vif setup is completed.
Parameters:
| is_completed | if true the vif setup is completed. |
| XrlCmdError mfea_client_0_1_recv_protocol_message4 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index,
const IPv4& source_address,
const IPv4& dest_address,
const int32_t& ip_ttl,
const int32_t& ip_tos,
const bool& is_router_alert,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_protocol_message4 |
[protected]
Receive a protocol message from the MFEA.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| protocol_name | the name of the protocol that sends a message. |
| protocol_id | the ID of the protocol that sends a message (both sides must agree on the particular values). |
| vif_name | the name of the vif the message was received on. |
| vif_index | the index of the vif the message was received on. |
| source_address | the address of the sender. |
| dest_address | the destination address. |
| ip_ttl | the TTL of the received IP packet. If it has a negative value, it should be ignored. |
| ip_tos | the TOS of the received IP packet. If it has a negative value, it should be ignored. |
| is_router_alert | if true, the IP Router Alert option in the IP packet was set (when applicable). |
| protocol_message | the protocol message. |
| XrlCmdError mfea_client_0_1_recv_protocol_message6 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index,
const IPv6& source_address,
const IPv6& dest_address,
const int32_t& ip_ttl,
const int32_t& ip_tos,
const bool& is_router_alert,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_protocol_message6 |
[protected]
| XrlCmdError mfea_client_0_1_recv_kernel_signal_message4 (
const string& ,
const string& ,
const uint32_t& ,
const uint32_t& ,
const string& ,
const uint32_t& ,
const IPv4& ,
const IPv4& ,
const vector<uint8_t>&
)
| mfea_client_0_1_recv_kernel_signal_message4 |
[protected]
Receive a kernel signal message from the MFEA.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| protocol_name | the name of the protocol that sends a message. |
| protocol_id | the ID of the protocol that sends a message (both sides must agree on the particular values). |
| message_type | the type of the kernel signal message (TODO: integer for now: the particular types are well-known by both sides). |
| vif_name | the name of the vif the message was received on. |
| vif_index | the index of the vif the message was received on. |
| source_address | the address of the sender. |
| dest_address | the destination address. |
| protocol_message | the protocol message. |
| XrlCmdError mfea_client_0_1_recv_kernel_signal_message6 (
const string& ,
const string& ,
const uint32_t& ,
const uint32_t& ,
const string& ,
const uint32_t& ,
const IPv6& ,
const IPv6& ,
const vector<uint8_t>&
)
| mfea_client_0_1_recv_kernel_signal_message6 |
[protected]
| XrlCmdError mfea_client_0_1_add_mrib4 (
const string& ,
const IPv4Net& ,
const IPv4& ,
const string& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t&
)
| mfea_client_0_1_add_mrib4 |
[protected]
| XrlCmdError mfea_client_0_1_add_mrib6 (
const string& ,
const IPv6Net& ,
const IPv6& ,
const string& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t&
)
| mfea_client_0_1_add_mrib6 |
[protected]
| XrlCmdError mfea_client_0_1_delete_mrib4 (
const string& ,
const IPv4Net&
)
| mfea_client_0_1_delete_mrib4 |
[protected]
| XrlCmdError mfea_client_0_1_delete_mrib6 (
const string& ,
const IPv6Net&
)
| mfea_client_0_1_delete_mrib6 |
[protected]
| XrlCmdError mfea_client_0_1_set_mrib_done (
const string&
)
| mfea_client_0_1_set_mrib_done |
[protected]
| XrlCmdError mfea_client_0_1_recv_dataflow_signal4 (
const string& ,
const IPv4& ,
const IPv4& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const bool& ,
const bool& ,
const bool& ,
const bool&
)
| mfea_client_0_1_recv_dataflow_signal4 |
[protected]
| XrlCmdError mfea_client_0_1_recv_dataflow_signal6 (
const string& ,
const IPv6& ,
const IPv6& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const uint32_t& ,
const bool& ,
const bool& ,
const bool& ,
const bool&
)
| mfea_client_0_1_recv_dataflow_signal6 |
[protected]
| XrlCmdError mld6igmp_0_1_enable_vif (
const string& vif_name)
| mld6igmp_0_1_enable_vif |
[protected]
Enable/disable/start/stop a MLD6IGMP vif interface.
Parameters:
| vif_name | the name of the vif to enable/disable/start/stop. |
| XrlCmdError mld6igmp_0_1_disable_vif (
const string& vif_name)
| mld6igmp_0_1_disable_vif |
[protected]
| XrlCmdError mld6igmp_0_1_start_vif (
const string& vif_name)
| mld6igmp_0_1_start_vif |
[protected]
| XrlCmdError mld6igmp_0_1_stop_vif (
const string& vif_name)
| mld6igmp_0_1_stop_vif |
[protected]
| XrlCmdError mld6igmp_0_1_enable_all_vifs ()
| mld6igmp_0_1_enable_all_vifs |
[protected]
Enable/disable/start/stop all MLD6IGMP vif interfaces.
| XrlCmdError mld6igmp_0_1_disable_all_vifs ()
| mld6igmp_0_1_disable_all_vifs |
[protected]
| XrlCmdError mld6igmp_0_1_start_all_vifs ()
| mld6igmp_0_1_start_all_vifs |
[protected]
| XrlCmdError mld6igmp_0_1_stop_all_vifs ()
| mld6igmp_0_1_stop_all_vifs |
[protected]
| XrlCmdError mld6igmp_0_1_enable_mld6igmp ()
| mld6igmp_0_1_enable_mld6igmp |
[protected]
Enable/disable/start/stop MLD6IGMP protocol and MLD6IGMP CLI access.
| XrlCmdError mld6igmp_0_1_disable_mld6igmp ()
| mld6igmp_0_1_disable_mld6igmp |
[protected]
| XrlCmdError mld6igmp_0_1_enable_cli ()
| mld6igmp_0_1_enable_cli |
[protected]
| XrlCmdError mld6igmp_0_1_disable_cli ()
| mld6igmp_0_1_disable_cli |
[protected]
| XrlCmdError mld6igmp_0_1_start_mld6igmp ()
| mld6igmp_0_1_start_mld6igmp |
[protected]
| XrlCmdError mld6igmp_0_1_stop_mld6igmp ()
| mld6igmp_0_1_stop_mld6igmp |
[protected]
| XrlCmdError mld6igmp_0_1_start_cli ()
| mld6igmp_0_1_start_cli |
[protected]
| XrlCmdError mld6igmp_0_1_stop_cli ()
| mld6igmp_0_1_stop_cli |
[protected]
| XrlCmdError mld6igmp_0_1_get_vif_proto_version (
const string& vif_name,
uint32_t& proto_version)
| mld6igmp_0_1_get_vif_proto_version |
[protected]
Configure MLD6IGMP interface-related metrics. The 'set_foo' XRLs set the particular values. The 'reset_foo' XRLs reset the metrics to their default values.
Parameters:
| vif_name | the name of the vif to configure. |
| proto_version | the protocol version. |
| XrlCmdError mld6igmp_0_1_set_vif_proto_version (
const string& vif_name,
const uint32_t& proto_version)
| mld6igmp_0_1_set_vif_proto_version |
[protected]
| XrlCmdError mld6igmp_0_1_reset_vif_proto_version (
const string& vif_name)
| mld6igmp_0_1_reset_vif_proto_version |
[protected]
| XrlCmdError mld6igmp_0_1_enable_log_trace ()
| mld6igmp_0_1_enable_log_trace |
[protected]
Enable/disable the MLD6IGMP trace log.
| XrlCmdError mld6igmp_0_1_disable_log_trace ()
| mld6igmp_0_1_disable_log_trace |
[protected]
| XrlCmdError mld6igmp_0_1_add_protocol4 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index)
| mld6igmp_0_1_add_protocol4 |
[protected]
Add/delete a client protocol in the MLD/IGMP protocol.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| protocol_name | the name of the protocol to add/delete. |
| protocol_id | the ID of the protocol to add/delete (both sides must agree on the particular values). |
| vif_name | the name of the vif the protocol add/delete to apply to. |
| vif_index | the index of the vif the protocol add/delete to apply to. The added protocol will receive Join/Leave membership information about same-LAN members for the particular vif. |
| XrlCmdError mld6igmp_0_1_add_protocol6 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index)
| mld6igmp_0_1_add_protocol6 |
[protected]
| XrlCmdError mld6igmp_0_1_delete_protocol4 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index)
| mld6igmp_0_1_delete_protocol4 |
[protected]
| XrlCmdError mld6igmp_0_1_delete_protocol6 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index)
| mld6igmp_0_1_delete_protocol6 |
[protected]
| Generated by: pavlin on possum.icir.org on Thu Aug 28 12:52:12 2003, using kdoc 2.0a54+XORP. |
