[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [usb] IP Core vs. USB chip...
On Sat, 2003-08-16 at 02:47, [email protected] wrote:
> Rudi,
>
> Thank you for the lesson. That clears up several of my confusions.
>
> Our case is the one you describe as wanting to fit the entire design on a
> single FPGA. (or at least as close as we can get)
>
> I"m inclined to go with the 1.1 all-in-the-FPGA solution for the time
> being.
>
> Have you or anyone you know of ported your 1.1 USB OC to an Altera
> Nios platform? It would be nice to make it SOPC compliant and work
> directly with the Avalon switching fabric.
I don't know, may be somebody on the list can help out.
> Perhaps we could do (or support) the work and donate it back to the
> project.
Sure, that would be great ! It should if possible hock
on to the existing interface or provide an alternative
to the existing interface and keep the core back wards
compatible with existing designs.
> Ken
Regards,
rudi
--------------------------------------------------------
www.asics.ws --- Solutions for your ASIC/FPGA needs ---
----------------- FPGAs * Full Custom ICs * IP Cores ---
FREE IP Cores --> http://www.asics.ws/ <-- FREE IP Cores
--
To unsubscribe from usb mailing list please visit http://www.opencores.org/mailinglists.shtml