[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] problem about "petrify"
Aloha!
Lars Segerlund wrote:
>
> Yes it can't find it, if you specify ./petrify it should work, or att .
> to your path ( which is not recommended ! ).
>
> so
>
> %./petrify
>
> should run it
I have tested and can confirm that it works (so it's not the program). If you
read the file INSTALL (included in the Petrify TAR-ball) you would have found
that they recommend adding the Petrify PATH in order to run the program:
<snip>
You should define properly define the variables PATH and MANPATH
of your environment including the "bin" and "man" directories
of petrify respectively.
</snip>
Also for some testing, download the examples that are also available from the
Petrify web page.
BTW: The linux binary works like a charm in FreeBSD.
--
Med v�nlig h�lsning, Yours
Joachim Str�mbergson - Alltid i harmonisk sv�ngning.
VP, Research & Development
----------------------------------------------------------------------
InformAsic AB / Hugo Grauers gata 5B / SE-411 33 G�TEBORG / Sweden
Tel: +46 31 68 54 90 Fax: +46 31 68 54 91 Mobile: +46 733 75 97 02
E-mail: [email protected] Home: www.informasic.com
----------------------------------------------------------------------
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml