[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] compactflash/PCCARD-Interface
In my previous project, we mapped the CompactFlash Card on the CPU (
StrongArm ) Memeory address
we used an FPGA to do some basic translation, no memeory was needed, just
the some control signals
were generated and it works
If you would like the code I will attach it
Y
----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Friday, August 01, 2003 9:05 PM
Subject: [oc] compactflash/PCCARD-Interface
> I'm looking for an interface for producing a PCCARD or CompactFlash-
> Card. Many vhdl-implemention for Host-Interfaces I found. But nothing
> for the cardside-Interface.
> Maybe the best solution is a cardinterface which included some memory
> (appr. 2048 bit) and my hardware has access to this memory.
> Host (reading/writing) -> PCCARD ->Memory(on card) <- my vhdl-code
> (reading/writing)
> Anybody has some ideas?
> thanx
> --
> To unsubscribe from cores mailing list please visit
http://www.opencores.org/mailinglists.shtml
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml