From: Thunder ([email protected])
Date: Mon Nov 18 2002 - 13:33:24 CET
Guten Tag Karim Homsi,
Am Montag, 18. November 2002 um 12:12 schrieben Sie:
KH> I tied to(and I am still trying to)get that stupid
KH> rtl8139 card running. Somebody told me that this
KH> networkkard isn t supported by mu.
KH> You ll have to get the driver from Donald Becker and
KH> compile it by yourselfe.
KH> When I searched for that driver at Beckers homepage, I
KH> expected to find a gziped file which contains the
KH> driver. But instead I found a written text.
KH> Is that the driver?
KH> If you want we can try together to get this card
KH> running under mu.
KH> ps you need not to specify an I/O adress.This card
KH> autobrobes!!!!!
KH> --- Thunder <[email protected]> schrieb: > Guten
KH> Tag Michele Andreoli,
>>
>> Am Samstag, 16. November 2002 um 13:24 schrieben
>> Sie:
>>
>> MA> On Sat, Nov 16, 2002 at 11:27:34AM +0100,
>> Thunder nicely wrote:
>> >>
>> >> MA> Michele
>> >>
>> >> when i tray to configurat my network card (setup
>> -f eth0)
>> >> i get the massage:
>> >> Loading module: net/rtl8139
>> >> Symbol 'io' not found
>> >> Soory: card rtl8139 os not well configurad.
>>
>>
>> MA> Symbol "io" not found. This is different from
>> message you
>> MA> posted early.
>> MA> This card need no io= specificication.
>> MA> Please, blank the IO and the IRQ values, putting
>> '' when
>> MA> prompted.
>>
>> MA> Michele
>>
>> yes it was different, this massage apears after i
>> had installed the
>> packed.
>> ok, big thx.
>>
>> Thunder
>>
>>
>>
KH> ---------------------------------------------------------------------
>> To unsubscribe, e-mail:
>> [email protected]
>> For additional commands, e-mail:
>> [email protected]
>>
KH> __________________________________________________________________
KH> Gesendet von Yahoo! Mail - http://mail.yahoo.de
KH> Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de
KH> ---------------------------------------------------------------------
KH> To unsubscribe, e-mail: [email protected]
KH> For additional commands, e-mail: [email protected]
You doesn't need a driver. type
setup -f eth0
then y, 2, rtl8139
and the i/o und irc must be blank.
i have had the same problems.
Thunder
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:23 CET