From: Karim Homsi ([email protected])
Date: Mon Oct 28 2002 - 19:05:47 CET
I Did like U told me. First setup -f eth0 then setup
-f network.
The io errormessage disappeared but after
networkinstallation the module net/rtl8139 can t be
loaded .
Should I delete all and install all new?
--- Michele Andreoli <[email protected]> schrieb: >
On Sun, Oct 27, 2002 at 02:50:15PM +0100, Karim
> Homsi nicely wrote:
> > I ve mulinux13r2 and I want to get my network
> running.
> > I did setup -f network and than setup -f eth0.
> > Than I got an error message: " Soading module:
> > net/rtl8139
> > Symbol 'io' not found.
> > Siocsifflags: No such device
> > Siocsifflags: No such device "
> > What did I wrong?
> > My networkkard isn t visible under ifconfig.
> >
>
> First of all, you must reverse the process:
>
> setup -f eth0
> setup -f network
>
>
> because setup/network can use different interface
> (not only NIC)
>
> After that, you must blank the IO and IRQ directives
> in setup/eth0
>
>
> Michele
>
>
> --
> "Physics is like sex: it may give some practical
> results, but that's not why we do it" (Richard
> Feynman)
>
>
---------------------------------------------------------------------
> To unsubscribe, e-mail:
> [email protected]
> For additional commands, e-mail:
> [email protected]
>
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:23 CET