From: Stephen Isard ([email protected])
Date: Wed Aug 14 2002 - 12:19:23 CEST
Dirk Heilemann wrote:
> But I need it the other way around: coming from the LAN with telnet I like
> to see whats happening on my small PBX via nullmodem cable connected to a
> running mulinux.
Sorry, I misunderstood. I thought your other device was a vt100
terminal, and since you can't log in on one of those, I thought you must
be trying to log in *from* it.
Try 'miterm -s 9600 -l /dev/ttyS0'. I don't know where to find a
miterm manual page, but steps 1&2 of the instructions at
http://www.geocities.com/rlcomp_1999/serialinstall.html seem to apply to
your case, and that's what they use. The mulinux faq lists the
arguments available for miterm at
http://sunsite.dk/mulinux/mu/faq/faq-5.html#ss5.8, but ducks the
question about whether there is a man page. There is a minicom command
in /usr/bin, but as far as I can see, it just calls miterm.
Stephen Isard
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:22 CET