From: Mike Peel ([email protected])
Date: Tue Mar 05 2002 - 18:27:41 CET
Hi,
I've successfuly loaded mulinux 12r2 but I can't get it to recognize my
3C509 card. It gives a "Symbol io not found, 3c509 is not well
configured" error.
I've run the 3COM supplied test/config program and set the card to 0x210
and irq 11 , and I specify these settings in "setup -f eth0", but I
still get the same error.
Any help appreciated
Mike Peel
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:21 CET