From: Michele Andreoli ([email protected])
Date: Sat Feb 02 2002 - 18:07:43 CET
On Sat, Feb 02, 2002 at 03:28:15PM +0200, [email protected] nicely wrote:
> I'm using mulinux 12r2 as firewall between my lan and dialup connection;
> it's running on 486dx2 installed on HD and with monochrome monitor.
> Because normally there's no keyboard on this pc,i'd like to have on
> console the trafshow application in order to control traffic.
> I have 2 problem:
> 1) How the screensaver can be disabled?
Screensaver? Are you meaning the BIOS blanking on the console?
> 2) i tried to redirect output of trafshow with "trafshow -m -i ppp0 >/dev/console"
> but seems to be a problem about ansi visualization (it seems to be
> a line more or less than required, so the visualization isn't correct)
> Launching trafshow on normal console using keyboard it works fine,but
> i'd like to launch it automatically at the dialup connection.
> How can i do?
>
trafshow emits escape code; why you redirect its output?
You can run something at the dialup with two method:
1) editing the ppp-on script
2) editing the /etc/ppp/ip-up script.
The ppp-on script will end only when IP is up, so you can use it
Michele
-- I keep trying to locate a meeting of Quantum Physicists. But everytime they set a meeting time, the location changes. And vice versa -- Anonymous --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:21 CET