From: JesusC ([email protected])
Date: Mon Jan 28 2002 - 01:39:24 CET
Hello Fabio,
Thursday, January 24, 2002, 8:56:10 AM, you wrote:
FS> Hi Jesus,
FS> sorry for the delay. here are the files:
FS> http://sat.otium.ch/downloads/lcdproc/lcdproc.tgz
FS> http://sat.otium.ch/downloads/lcdproc/LCDd.conf
FS> I added support for HD44780 compatible displays only. I tested 8 bit wiring and that worked well (check out the /docs dir for more about the connection to your pc).
FS> There is one mysterious thing:
FS> the LCDd daemon only works in debug mode on my system. Therefore it produces a lot of unused debug messages (you can redirect it to /dev/null). I also put the release version to the tgz file.
FS> Probably you have more luck.
FS> Instruction:
FS> Daemon:
FS> LCDd -c /etc/LCDd.conf > /dev/null
FS> Client:
FS> lcdproc C T & # Shows the CPU state and the systemtime. type lcdproc --help for more...
FS> Best Regards Fabio
>> -----Original Message-----
>> From: JesusC [mailto:[email protected]]
>> Sent: Tuesday, January 22, 2002 11:40 PM
>> To: Fabio Soldati
>> Subject: Re: LCDProc
>>
>>
>> Hello Fabio,
>>
>> Monday, January 21, 2002, 1:19:02 PM, you wrote:
>>
>> FS> I tested it on muLinux with a 20x4 display on the
>> parallel port and it
>> FS> worked fine. If someone is interested I can put the
>> binaries (libc5
>> FS> compatible) to an ftp server.
>>
>> YES PLEASE!!!!
>> Jesus,
>>
>>
>> --
>> Best regards,
>> JesusC mailto:[email protected]
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>>
Thanks a lot, Fabio!.
Jesus.
-- Best regards, JesusC mailto:[email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:21 CET