From: Dave Houghton ([email protected])
Date: Fri Feb 09 2001 - 21:55:39 CET
On Thu, Feb 08, 2001 at 07:44:12PM -0800, Bob Romprey wrote:
> Michele,
> I don't know if this is of any help, but when installing a modem under windoze the option to use LPT1 as the "port" for the modem is there.
> Think I'll look at that because a LP port will send/receive data at much better rates than a serial port(8 data lines???)
>
You can specify either lpt or com ports as VIRTUAL modems for direct cable connection, but and its a big but, the transmission protocol of M$ dcc is unique to Windoze and doesn't use either slip or plip. Win to Win o.k. Win to Linux ... forget it. You can specify slip but only over a dial-up connection.
My humble little company manufacture distributed stage lighting hardware/interfaces and we thought of using dcc and a Vbasic prog as an alternative to our dedicated lighting desks but rapidly hit the proverbial brick wall. We now use QNX for PC control of the main distr point.
-- Dave muLinux UK mirror ICQ ........... Remember... if you break it you get to keep both halves --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:18 CET