From: Karl-Heinz Zimmer ([email protected])
Date: Mon Feb 05 2001 - 10:37:06 CET
On Son, 04 Feb 2001 J�rgen wrote:
> Hi!
>
> After i've logged in. mu Linux (11R6) shows the message:
>
> INIT: Id "T1" respawning to fast: disabled for 5 minutes
Note: Having had lots of work to do in last weeks and months
I partialy lost contact to the muLinux project and so
I don't know exactly what is going wrong here.
But to find out about that error you might want to look in file
/etc/inittab for the "T1" entry.
You should find an inittab entry whose ID field (the first
field/column of a non-comment line) is "T1". The process which
is "respawning too fast" is the command in the fourth field
of this line. Refer to `man 8 init` and `man 5 inittab` for
details on init and inittab.
in short: Your serial device is most likely not defined.
see: http://beta.linuxrouter.org/faq/LRP-FAQ-6.html
topic: 6.8
Karl-Heinz
-- Karl-Heinz Zimmer Senior Software Engineer Klar�lvdalens Datakonsult AB <mailto:[email protected]> --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:18 CET