From: Angoli Giovanni ([email protected])
Date: Thu Dec 21 2000 - 16:00:06 CET
Hello Pat, Hello all
What you say is not entirely true, older Iomega Zip100 (the kind supported
by ppa.o
kernel module) works nicely under mulinux 11r2, no magic i just did setup -f
scsi
(because Iomega Zip is seen as a SCSI device) and entered ppa as my SCSI
interface.
ppa is a low level SCSI driver.
Keep in mind not to use lp.o module which conflicts with ppa.
There is no support for newer parallel Zip (100, 250) because imm.o afaik
appeared only
in 2.2.x kernels.
I've also checked slackware archives for imm.o for 2.0.x kernel with no
luck.
Oh well my older Zip is working nicely :) i got the new one on my biggest
Debian box.
Before saying goodbye i'd like to say merry xmas and happy new year to all
the
list subscribers, in particular Michele and all the (almost silent) italian
guys :)
Bye!
Gio
-----Original Message-----
From: Dumas Patrice
To: [email protected]
Sent: 12/21/00 12:32 PM
Subject: Re: Iomega Zip100
Robert Heezeman a écrit :
> Does / will mulinux have support for parallel port
> Iomega Zip100.
From mow on, there is no direct support in mulinux for parallel port
devices. It
requires tons of modules, in fact to handle all the protocols. Maybe
this could be on
an add-on ?
Do you have it running on a big linux, so that you know which modules
are required ?
To have it work under mulinux would only require the insmod of the
modules...
I can also make a .fun to handle parallel port devices, but it requires
first all the
modules. Does someone know a location of an archive with all the modules
compiled for
2.0.36 ?
Pat
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:17 CET