From: José Luis Gómez Dans ([email protected])
Date: Mon Dec 11 2000 - 11:22:47 CET
On Mon, Dec 11, 2000 at 12:38:47AM -0800, [email protected] wrote:
> * I want to know how do I configure my ethernet card / modem card which not listed ??
Modem: if the modem _works_ under linux (i.e.,
it's_not_a_winmodem), then you only need to configure the serial port.
In general, this isn't usually needed, as your serial port is in one of
the standard IRQ/Port configurations (mine isn't, btw)
NIC: You need to get a module for it, if it isn't in mulinux.
[NOTE: This could be an interesting thing: we can compile modules for
mulinux and put them on the ftp site. I believe toms' has something like
that. Is it feasible?]
> * why mulinux can't detect my logitech mouse ???
> * startx always give error message : "libm.so.5 not found ". Where's libm.so.5 ?? Must I d/l it ??
This has been asked before... You need an extra floppy if memory
serves... Search the list?
José
-- José L Gómez Dans PhD student Tel: +44 114 222 5582 Radar & Communications Group FAX; +44 870 132 2990 Department of Electronic Engineering University of Sheffield UK --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:17 CET