From: Johannes Krausmüller ([email protected])
Date: Thu Jun 15 2000 - 13:47:36 CEST
> Both have IRQ 5? Is this correct? This "ping is not working" could be a
> interrupt problem! Most drivers load with wrong IRQ setting, but don't
> work.
Thanks for your answer. I changed the irq of the SuSE-machine from 5 to 12
and now (after working on this problem for days) everything works fine.
But now my problem is the telnet-connection from the PII to muLinux. I set
up the telnet service by configureing muLinux with the command "setup -f
server". When I try to connect to the 386 I shall type in my username. But
I'm not able to enter my password. Before I can do so. the message comes
that the password is incorrect. What could be the problem?
Johannes Krausmüller
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:14 CET