From: Sven Conrad ([email protected])
Date: Mon May 29 2000 - 09:41:51 CEST
Johannes Krausmüller wrote:
> I do not need to install any addons for muLinux to run a network with my
> other Linux-PC, or?
I don't know all mulinux versions, but AFAIK you need only /usr for simple
networking in all versions. No EXT or like.
> I installed the card and everything seems to be allright. But when I try
> to ping from one PC to the other all packets get lost. I think all
settings
> are right.
> I know that this is not a very detailed information. But can anybody
help
> me?
>
Don't think so. Because, if you did everything right and all looks good,
it
would work!
Please let use know more. E.g. what look the output of ifconfig look like,
what route, or if you don't have the eth0 device, what says the module on
loading ...... and so on .....
Or decribe your hardware and post your setting. May be there is a easy
fault...
Then there is a good chance to help you.
/sven
-- Sent through GMX FreeMail - http://www.gmx.net --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:14 CET