From: Jef Knoors ([email protected])
Date: Thu May 04 2000 - 13:21:06 CEST
How much free space is there on H: ?
You must recon that mulinux might want to use space for a swap file (~16Mb)
and perhaps other temperarly files.
Increase space on H: with the drivespace program in win 3.1
Jef
----- Original Message -----
From: Andrea Boriani <[email protected]>
To: <[email protected]>
Sent: Thursday, May 04, 2000 11:54 AM
Subject: R: mulinux help needed
> My computer has 6 Mb of ram.
> I have win 3.11 installed, dos 6.1.
> The disk is compressed with doublespace and all the files of mulinux are
on
> the
> uncompressed drive H.
> Whe I boot the installer everything seems fine.
> The hd is found as hda1
> a compressed image is found in RAMDISK 0
> the processor is recognized (386sx without math co-processor)
> then I'm prompted with the Welcome screen and given the three choices
> the last line shows
> Your choice (1/2/2) [1]? _
> the cursor is flashing but if I press 1,2,3, enter or anything else
nothing
> happens.
>
> Any help is greatly appreciated
>
> btw, PS/2 Model L40sx is a special choice during the installation of win
> 3.11 I think for something about the floppy drive...
>
> Andrea Boriani, software engineer
> [email protected]
> ICQ# 20445755
>
>
>
> -----Messaggio Originale-----
> Da: Michele Andreoli <[email protected]>
> A: <[email protected]>
> Data invio: mercoledì 3 maggio 2000 19.33
> Oggetto: Re: mulinux help needed
>
>
> > On Wed, May 03, 2000 at 06:59:29PM +0200, Andrea Boriani nicely wrote:
> > > I'm trying to install mulinux on a IBM Ps/2 Model L40sx.
> > > The installation goes well ultill linux boots for the first time and
I'm
> > > given the three choiches:
> > > 1- Create the image disks...
> > > 2- uncompress...
> > > 3- ...
> > >
> > > at this point the computer locks (I can make no choice and pressing
> enter
> > > does nothing)..
> > >
> > > any idea???
> > >
> >
> > Please: have you only 3-4 MegaBytes of RAM?
> >
> > Michele
> >
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:14 CET