From: Peter Sin ([email protected])
Date: Fri Apr 21 2000 - 15:50:25 CEST
Michele,
Thanks a lot for mulinux. It is great fun!
I have made the direct modem-modem connection
before (when I had no null modem cable handy).
When the physincal connection is in place open the
communications programs on both machines
and set them to echo your input by typing ATE1
into the terminals. Also check that both
modems have the same settings (speed, flow control etc.)
Then on one machine type ATA
and on the other type ATD. You should hear the
modems connecting.
I just tested this on my two machines and it seems to work.
Best regards,
Peter
----- Original Message -----
From: "Michele Andreoli" <[email protected]>
To: <[email protected]>
Sent: Thursday, April 20, 2000 4:26 PM
Subject: [TECH] Modem-to-Modem wire connection
> Hi!
>
> This is a question for electronic engeneering: it is possible
> to connect together two modems, using simple telephonic cable,
> and to use standard tools to communicate between?
>
> I think the problem is "central tone", etc. Some experience
> on this list?
>
> Michele
> --
> I'd like to conclude with a positive statement, but I can't
> remember any. Would two negative ones do? -- Woody Allen
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:14 CET