From: Clive Wright ([email protected])
Date: Mon Apr 10 2000 - 23:06:24 CEST
Tassos wrote:
>
> what it means if it freezes during installation with the message
> "RAMDISK:compressed image found at block 0 " ???
> ----- Original Message -----
> From: winsor <[email protected]>
> To: <[email protected]>
> Sent: Sunday, April 09, 2000 6:07 PM
> Subject: Re: mu setup : help
>
> > I'd think that upgrading would be as simple as merely doing a setup -f
> > usr and inserting the "boot-root-usr" disk from a later version for the
> > base system other extension disks could be upgraded in the same manner.
> > of course finishing with a setup -s
> > good luck
> > winsor
A problem with upgrading "usr" with the "boot-root-usr" is
that the position of the usr archive changes from one
version to the next. The result is that the setup from one
version cannot find "usr" from a different version as it
will be at the wrong block #. The workaround should be to
use ./mu -i 4 to store the usr archive on its own disk so
that it can be found at block 0.
Clive
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:13 CET