From: Michele Andreoli ([email protected])
Date: Mon Apr 03 2000 - 14:54:14 CEST
On Sun, Apr 02, 2000 at 09:43:24PM +0200, Hans-Jürgen Kozik nicely wrote:
> I am using mulinux 6r4 on a 486-33 with 4MB Ram. I have cloned mulinux
> on my harddisk and i am using a swap-partition. I want to use the
> machine as gateway with ipmasquerading and i don't know how to configure
> two ethernet cards with setup -f eth. I only can configure one card,
> eth0. The eth.cnf configuration file doesn't allow me more than one
> network card/kernel module. Is there another way (e.g. to execute
> automatically insmod and/or ifconfig within the startup sequence)?
The only chance is to put the code relative to 2th card in Setup/Local.
>
> Then i also i want that my clients can use ftp, icq and irc. In the
> how-to's i found that i need additional kernel modules (e.g.
> ip_masq_ftp, ip_masq_raudio) if i want these services. Are these modules
> available for mulinux 6r4 and how can i load them?
>
Masquerading for ftp, irc etc are not available in this kind of kernel,
or I haven't compiled it. Sorry. This is a specialized usage.
Michele
-- I'd like to conclude with a positive statement, but I can't remember any. Would two negative ones do? -- Woody Allen --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:13 CET