From: Michele Andreoli ([email protected])
Date: Wed Feb 16 2000 - 13:43:03 CET
On Tue, Feb 15, 2000 at 09:57:56PM +0000, Clive Wright nicely wrote:
>
> I unpacked the old dostools in
> c:\dostools and all went relatively well except for a typing
> error "setup is ispecting your computer" should be
> "inspecting".
Corrected.
> That was too easy and you did say "test it" so
> I moved \dostools to g: (/dev/hdb7). This time it failed
> completely. I enclose part of the narrative together with my
> partition table as seen by fdisk.
>
> VFS: Can't find a valid MSDOS filesystem on dev 03:07.
> UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
> Unable to handle kernel paging request at virtual address
> c4defbe4
dev 03:07 (major 3, minor 7) is /dev/hda7
> /dev/hda7 651 780 524128+ 7 HPFS/NTFS
This is your NTFS partition.
> .
> Segmentation fault
> Mounting /dev/hdb1 ...
> mount: /dev/hdb1 already mounted or /mnt busy
The problem is: segmentation fault. Aborting, the script do not
umount /mnt. Then, at next probe, the mounting of first /dev/hdb* series
fail. This is the "/mnt busy" message.
What happen normally when you mount /dev/hda7 without -t switch from
the mulinux console?
Michele
-- I'd like to conclude with a positive statement, but I can't remember any. Would two negative ones do? -- Woody Allen --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:13 CET