From: Renato ([email protected])
Date: Thu Jan 27 2000 - 14:18:54 CET
Hi, winsor,
I already went to manufacturer site and downloaded the HD user manual.
Master setting is jumpers off.
Unfortunately, with no jumpers at all, the HD is still being recognized as slave.
I think its controller isn't working fine.
renato
*********** REPLY SEPARATOR ***********
On 26/01/00 at 20:52 winsor wrote:
>Renato,
>
>Is there any particular reason you can't make this HDD a master???
>I know that the difference between slave and master usually lies in the
>jumper settings.
>If you need jumper settings you can go to
>http://www.blue-planet.com
>They have a fairly complete list of both new and old hard disks along
>with all the setup parameters and jumper settings.....
>
>good luck
>
>signed
>winsor
>
>
>Renato wrote:
>>
>> *********** REPLY SEPARATOR ***********
>>
>> On 26/01/00 at 19:23 Michele Andreoli wrote:
>>
>> >On Wed, Jan 26, 2000 at 12:40:15PM -0200, Renato nicely wrote:
>> >> Michele,
>> >>
>> >> I am trying to make a Frankenstein based on an good old mainboard (386DX40 + 8M) and a 40MB laptop hard disk, without floppy drive (unfortunately I have no working 5-1/4 floppies anymore).
>> >> I cloned a UMSDOS mulinux installation to the HD but I could not configure it to work as master drive.
>> >> Do you know if the procedure you sugest below would work if I used root=/dev/hdb1 (first slave HD partition eith no master HD)?
>> >>
>> >
>> >I can't understand what you means. You trasported an UMSDOS pkzipped
>> >installation in a new machine?
>>
>> No. I boot mulinux from floppy (I install a temporary floppy drive), configure and then cloned into the DOS formated HD (recognized as slave). Then I see I cannot boot DOS from slave HD (to start mulinux with linux.bat) neither force hardware to recognize the HD as master.
>> >
>> >If it's true, you have to do TWO think to rewake the new system
>> >
>> >1. change loadling.cfg with the new root=/dev/XYZ ...
>> >2. rm /dev/root ; ln -s /dev/XYZ /dev/root
>> >
>> >Step 2 requires a working muLinux. Mount the umsdos partition
>> >from the floppy-mulinux and do the changes.
>> >
>> >Michele
>> >
>> >--
>> >I'd like to conclude with a positive statement, but I can't
>> >remember any. Would two negative ones do? -- Woody Allen
>> >
>> >
>> >---------------------------------------------------------------------
>> >To unsubscribe, e-mail: [email protected]
>> >For additional commands, e-mail: [email protected]
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [email protected]
>> For additional commands, e-mail: [email protected]
>
>--
>The more I use Linux, the harder Windows becomes to use. Point and click
>software is too restrictive and difficult to do anything productive
>with.
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: [email protected]
>For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:13 CET